Installation manual

FOUR MINOTAURS in a parallel/bridge mode configuration
continued.
The MASTERamplifier receives the signals from the source unit.
SLAVE 1 and the MASTER are bridged as a pair as per instructions on Page 32.
The MASTER drives from its NON INVERT line output to SLAVE 2
SLAVE 2 drives SLAVE 3 from its INVERT line output.
SLAVE 2 and SLAVE 3 are then connected in bridge mode.
The MASTER controls the crossover frequencies, the phase, the master level and the
equalization.
SLAVE 2’s LEVEL control shall control the relative level of the second bridged pair.
Leave the equalization controls on SLAVE 2 in their “0” positions.
Page 34