User's Manual

ManualsBrandsZeeva International ManualsAudio EquipmentBT LED CAT HEADPHONE

INSTRUCTION MANUAL

Congratulations, and thank you for choosing

the Meow Wireless Headphones.

This manual will help you operate the

Meow Wireless Headphones, but firstly

you should familiarize yourself with the

Bluetooth functionality of your mobile

phone or other devices before using

the Meow Wireless Headphones.

1 X Micro USB

Charging Cable

1 X Instruction Manual

To use your Bluetooth headphones, you must

first pair your headphones with a mobile phone

or other Bluetooth device. Once your Bluetooth

headphones is paired to a specific mobile

phone, they will remain paired and

automatically recognize each other whenever

they are within range.

Use a mobile phone with Bluetooth

function or other Bluetooth devices

to perform necessary pairing action.

After pairing, the LED indicator slowly

blinks with blue.

Plug the Micro USB to the Micro

USB port. When charging, the LED

indicator turns red. After full charging,

the LED indicator turns off.

Answering

a Call

5. Product Specification

6. FAQ

Turn on your phone and ensure the Bluetooth

function is activated.

Turn on the headphones, enter the pairing mode.

Search your Bluetooth devices on your phone

by following the phone’s instructions. Refer

to your phone’s user manual for more

information.

After a few seconds the phone will list the

“BT MEOW HP” as a discover device.

Select it and follow your phone’s instructions

to select this pairing.

Your phone will confirm the pairing, and then

press Yes/OK.

Use the Micro USB charging cable accessory

provided with this headphones. Connect the

Micro USB plug to the Micro USB

charging port on the headphones positioned

at in headphones diagram on page 2.

Connect the USB plug to a USB port on

a computer or wall adapter to activate

charging.

For your safety, please always use an

appropriate 5V input charger/Adapter to

charge the product. DO NOT USE Quick

Charging USB Adapter to charge the

product, as it might damage the product.

**Make sure to keep the headphones charging

for a minimum of 2 hours before initial use.

USB Plug Micro USB Plug

Please follow the rules depicted in this

manual closely to ensure your safety.

Before using this Bluetooth headphones,

we would strongly encourage you to read

through this user manual.

Do not modify, repair or dismantle this

Bluetooth headphones. Doing so may

result in fires, electric shocks, complete

breakdown of this Bluetooth headphones,

etc. All are not covered under warranty.

Be more wary of any edges, uneven

surfaces, metal parts, accessories and

its packaging so as to prevent any

possible injury or damage.

Do not use an diluent or volatile liquid to

clean the Bluetooth headphones.

Do not use the Bluetooth headphones in a

hazardous location.

1 X Meow Wireless Headphones

Press and hold the On / Off Button

for 3 seconds. After turning on, the

LED indicator flashes red/blue.

Press and hold the On / Off Button

for 3 seconds.

Play / Pause

Music

Press On / Off button to play music

and press it again to pause music.

Cat Ear LED

Light On / Off

Press the Cat LED On/Off button to

turn the LED light on and off.

Note: The LED light is only on when

Bluetooth power is turned on

Press On / Off button to answer phone

call, press On / Off button again to end call.

Press and hold 2 seconds to reject call.

Double click to redial last call.

4.2. Pairing to Mobile phone or other device 4.3. Charging your headphones

FCC ID: 2ADM5-HP-0674

7. FCC Statement

Charging

Turn off

Pairing

Turn on &

Enter the pairing

mode

2. Packaging Contents 4. How to use1. Introduction

Table of Contents

1 Introduction································

2 Packaging Contents·····················

3 Connection Diagram·····················

4 How To Use·······························

4.1 General Function···················

4.2 Pairing To Mobile Phone··········

4.3 Charging Your Headphones ·····

5 Product Specification···················

6 FAQ·········································

7 FCC Statement···························

Battery Statement·······················

-The input voltage to the product is 5V 1A.

-In order to charge the product in safe manner and reliable conditions, please

only adopt certified appropriate charger/ adapter for charging the product.

-Only charge the product at ambient temperatures between 10 deg °C/ 50

deg °F

and 40 deg °C/104 deg °F.

- Do not heat above 70 deg °C/158 deg °F, e.g. Do not expose to sunlight or

throw into fire.

-Switch off the product after use.

-Please note that we won’t take any responsibility for any wrong operation

(e.g. Voltage higher than 5V) as this may result in severe injury or loss of

property, and we cannot control the operating process during the time the

user using this product.

-In extreme cases, abuse or misuse of Lithium battery pack can lead to

explosion, heat generation, fire development or smoke development.

Safety instructions for the lithium battery and charging the product

Keep All Relevant Information For Future Reference

Warning:

• You must select a qualified charger from

a regular manufacturer.

• You must charge the Bluetooth headphones

if it has not been used for more than 6 months.

1. Why is there no power even when the headphones

is turned on ?

Ans: Ensure the battery has been charged up to

1 hour for initial use.

2. There is no sound when playback.

Ans:

Check the connection between headphones with

phone or computer, if the connection is not established,

please connect again. Make sure the headphones is

paired and connected with your target phone or other

master device.

On / O Button

Microphone

LED Indicator

Micro USB

Charging port

Cat Ear LED Light

On / O Button

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference

that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The

device can be used in portable exposure condition without restriction.

Made in China

Item # HP-0674

Driver Diameter: 40 mm

Impedance: 32 Ohms

Frequency Response: 20 Hz - 20K Hz

Sensitivity: 95 dB +/- 3 dB

Battery Capacity: Li-ion Battery 3.7 V 200 mAh

Playtime: 3-4 Hours

Charging Time: 1-2 Hours

Bluetooth Range: 32.8 Feet

Charging Method: Micro USB Charging

Includes:

1(One) Headphones 6.46in. x 8.15in. x 3.15in. (16.4cm x 20.7cm x 8cm) /

1(One) Charging Cable 9.8in. (25cm) / 1(One) Instruction Manual

3. Connection Diagram

LED LIGHT-UP CAT EARSLED LIGHT-UP CAT EARS

Approval: Date: