Specifications

Page 4 of 8 www.zeevee.com
Getting Started
ZvBox 160 Front Panel
1 2
Description Function
1 LED Signals the activity of ZvBox 160. Also used in programming
2 Setup Button For setting broadcast channel
The LED shows solid blue during normal operation. During startup it will show:
Fast ashing blue/yellow (~20 cycles), followed by fast blue blink (~100 cycles),
followed by slow blue blink (~40 cycles), followed by solid blue that blinks twice after
30 seconds and returns to a solid blue. Video transmission begins when the LED
becomes solid blue. Continuous blue/yellow ashing LED indicates trouble found during
boot-up.
1 2 3 4 5 6
Description Function
1 RF Coax Output Encoded video as a well-formed QAM channel
2 S/PDIF audio input, RCA Accepts digital audio input (PCM or AC3)
3 S/PDIF audio input, Optical Accepts digital audio input (PCM or AC3)
4 Component Video input RCA connectors, 75 Ohm. Y, Pr, Pb
5 USB Control PC congure/control interface
6 DC Power DC power input, 12 volt
7 Reset Restores factory defaults
To restore factory defaults: Remove the power. Depress and hold the reset
button. Reapply power. LED will ash blue/yellow (~20 cycles), followed by fast blue
blink (~20 cycles), followed by *solid yellow*. Release the reset button. The unit
will then restore all factory defaults and go through a full reboot.
7
ZvBox 160 Back Panel