User Manual

Page 7 | ZvSync-NA User’s Manual www.zeevee.com
1.2 Rear'Panel'
1. Aerial/Cable/RF Input (F-type) – Connect to antenna for ATSC over-the-air
reception or to a cable feed for Clear QAM reception
2. HD Video Output – Most commonly used video output from the receiver unit.
Connect to the HDMI digital input of the display device (typically a
television). Both high definition video and digital audio are carried.
3. CVBS Video Output – Should composite video output be desired, connect the
CVBS Video output to the appropriate composite video input of the
display device (typically a television or monitor).
4. Right Audio Output – Should analog audio be desired, connect to the
appropriate ‘Right’ analog audio input on the display device (typically a
television or amplifier).
5. Left Audio Output – Should analog audio be desired, connect to the
appropriate ‘Left’ analog audio input on the display device (typically a
television or amplifier).
6. Power Connector – Connect to the plug on the supplied wall-mount power
supply.