User's Manual
Left/Right Slide Trim
Forward/Reverse
Movement Trim
Throttle
Steering
Forward
Ascend
Slide
right
Turn
right
Slide
left
Turn
left
Push
(Stunt mode)
Push
(High/low
speed)
Descend
LED
Flashing=Searching
On=Paired
Backward
About Easy and Expert Fly Modes
This drone is designed with 2 play modes.
• Expe rt: select this mode when you are ready
to fly at a higher speed and perform stunts.
• Ez (Easy) for beginners and new drone owners.
This operates at a slower speed to help you
focus on basic navigation and develop a feel of
thethrottle’ssensitivity.Bydefault,inEzmode,
the stunt and speed options are disabled
to prevent them from being accidentally
activated.
• Whenpairingandflyingforthefirsttime,we
recommend you use Ez for practising your
takeoff, steering and landing skills.
Pairing
1. Place the drone on level ground.
2. Turn on the remote control to Ez or Ex. The
remotecontrol’sLEDflashes.
3. Move the throttle all the way up and then
down to pair the remote control with the
drone.Thedrone’sbladesremainstillduring
pairing.Whenpaired,theLEDsonboththe
remote control and drone light steadily.
Note: Ifpairingfails,turnoffthedroneand
remote control and repeat the steps above, or
change locations to avoid electrical interference.
Fly Your Drone
1. After pairing, with the drone on the ground,
move the throttle forward to ascend. To
avoid ground air turbulence, fly the drone at
least 1 ft. (30cm) off the ground.
For advanced users: Hold the remote control
with one hand, resting your thumb on the
throttle. Toss the drone about 4 ft. (1.2m)
away from you, and move the throttle
forward to fly. The drone adjusts itself
automatically and flies smoothly.
2. Forspeedoptions,pairandflyinEx mode.
Push the steering control in to switch
between high speed (double beep) and low
speed (single beep).
IMPORTANT: Ifyourdronecrashesupsidedown,
pull the throttle down and switch off the remote
control first. Never touch the drone when blades
are still moving.
Trim Your Drone
Move the throttle forward and see how the drone
reacts.
Forward/Reverse Movement Trim:
Ifthedronetendstomoveforward,
press
f
; if it tends to move backward,
press
g
.
Left/Right Slide Trim:Ifthedrone
tends to slide right, press
f
; if it tends
to slide left, press
g
.
Note: The remote control beeps when you press
a trim control but stops beeping when you reach
maximum trim adjustment.
Land Your Drone
1. Slowly move the throttle backward to
descend. Avoid moving the throttle too
quickly, as it can stop the blades instantly
and cause the drone to crash.
2. After playing, turn off the remote control
andremovethedrone’sbattery.
Perform Stunts
IMPORTANT: Make sure there is enough space
for the drone to perform stunts without crashing
into objects or people.
1. Push the throttle control in so that the
remote control beeps repeatedly to enter
stunt mode.
2. Use the steering control to perform stunts:
• Front flip: Move steering forward
• Back flip: Move steering backward
• Barrel roll: Move steering right or left
3. The drone automatically exits stunt mode
after performing a stunt.
Using the Camera
1. InsertamicroSDcard
(not included) in the
card slot as shown. Push
the SD card in until it
clicks.
2. During flight, press
once to take a photo,
or press and hold
to record a video.
Release the button to stop recording.
3. After flying, to remove the SD card, press it
to eject.
Note: Before inserting the SD card, make sure it
has enough free space. The SD card fits the slot
only one way. Do not force it.
Troubleshooting
Drone does not respond
• Make sure the drone and remote control are
switched on and paired.
• Dronebatterymaybelow.Fullychargethe
battery. See “Charge the Drone Battery”.
• Make sure the drone is within the control range
(65 ft./20 m) and in line of sight.
Drone dicult to control
• The throttle control is very sensitive. Use small,
fine movements to control.
• Practice in Ez (Easy)mode.
• Propellers may be deformed/ damaged. Adjust
thepropellersbyhand.Ifyoucannotadjustthem,
replace with the spare propellers.
FLY SAFELY
• Adultsupervisionisrecommendedatalltimes.
• Flythedronesafely.Ifitcrashes,theSDcardmayfallout
and be lost.
• Keepeyes,hands,hair,andlooseclothingawayfrom
moving propellers.
• Donotflythedronenearoratotherpeopleoranimals.
• Whenflyingindoors,keepthedroneawayfromwalls,air
conditioning, air vents, fans, breakable objects, and other
obstacles.
• Whenflyingoutdoors,keepthedroneawayfrompower
lines, trees, weeds, and water.
• Donotflyyourdroneoverprivatepropertywhereyouare
not welcomed.
• Donotflyyourdronewhereemergencyrespondersare
working, or emergency aircraft are operating.
Ex/ OFF/ Ez
Expert/Off/Easymode
SD
Replace Damaged Propellers
The left and right propellers of the
drone are different (see color and A/B
orientation marking on underside). Make
sure you insert the correct propeller
in the correct location, otherwise the
drone will fail to take off.
To replace a damaged propeller, remove
the old one and press the new one onto
thepropelleraxle.Ifyoucannotremove
the old propeller by hand, carefully use pliers.
WARNING:
• Toavoidinjuryanddamage,inspectthepropellersfornicksandbreaksandmakesurethey
are securely attached before and after each flight. Replace nicked, chipped, cracked or
broken propellers.
• Useonlythesuppliedpropellers.Donotalter,modify,orcustomizethepropellers.
Back Blades (black)
Front Blades (grey)
A
B
B
A
6001433_UG_Eng.indd 2 6/21/2016 6:55:37 PM


