User's Manual

10 11
Troubleshooting
Drone does not respond
• Make sure the drone and remote control are switched on and
paired.
• Drone battery maybe low. Fully charge the battery. See “Charge
the Drone.“
• Remote control batteries maybe low. Replace the batteries.
• Makesurethedroneiswithinthecontrolrange(70ft./21.3m)and
in line of sight.
Drone difficult to control
• The blades may be deformed due to a crash. Adjust deformed blades
byhand.Ifyoucannotadjustthem,replacewiththespareblades.
• Thethrottlecontrolisverysensitive.Usesmall,nemovements
to control.
• Ifyouareabeginner,settolowspeedmode.See“Fly Your
Drone.“
Replace Damaged Blades
The left and right blades of the drone
aredierent,andmarkedA/B marking
on the blade's underside. You must
use the correct blade in the correct
location.
Ifyouneedmoreblades,visityour
dealer for help.
WARNING:
• Toavoidinjuryanddamage,checkthebladesfornicksandbreaks
and make sure they are securely attached before and after each
ight.Replaceanydamagedblades.
• Useonlythesuppliedblades.Donotalter,modify,orcustomize
the blades.
A
A
B
B
To replace a damaged
blade,useascrewdriverto
remove the old blade. Insert
a new matching blade onto
thebladeaxle,thenscrew
securely.