User guide

1.2 Software installation

AG50241 Rev. 4 5

Macintosh Double-click the icon of the drive that holds the plugin. Open

any folders necessary until you can see the plugin folder:

hprtl.

5. Install the plugin into the following folder:

PC Open the folder containing the RIP application and the

folder. Click

Next. The installer copies the files and exits.

Macintosh Copy the plugin folder into the

Devices folder within the SW

folder:

RIP_folder/SW/Devices/plugin_folder

Copy the plugin folder by dragging it into the Devices

folder.

If you have correctly installed the plugin, a line similar to the following will appear in

the RIP monitor when you next start up the RIP:

If your computer is already connected to your output device, refer to “Getting started”

on page 9. Otherwise, see “Connecting to the printer” on page 7 for details of connec-

tion methods.

1.2.3 Using the installer

The procedure below describes how to use the installer to install both the Harlequin

RIP and the ProofReady plugin at the same time. If you have already installed your

RIP, just follow the instructions on how to install the plugin:

1. Place the media holding the software in an appropriate drive, which will usually

be a CD-ROM drive.

Locate and run the installer for your platform:

PC Run

install.exe at the top level of the distribution using

Windows Explorer.