User`s manual

- 25 -
7.4 Rename Channel
In the Main Page, press Rename key (white
color key) on the RCU.
This Rename command allows you to rename
the channel. First select the channel to be
renamed and press OK key, then a Keypad
dialog box will be displayed. Enter the desired
name. Check whether the channel name is
changed on the channel list.
7.5 Delete Channel
In the Channel manager, you can enter Delete
CH mode, if you press Delete key (Red color
key) on the RCU.
This Delete command allows you to delete the
channel permanently. First select the channels,
which you want to delete; the selected channel
number will be marked to “X”. If you cancel the
selection, press OK key again, then the marked
number will be back.
If you decide to delete, press EXIT key and then
press OK to delete.
If you press Delete SAT (Red color key) again, all channels of the whole satellite will be marked to
be deleted.
If you press Delete TP (Yellow color key) again, all channels of selected transponder frequency will
be marked to be deleted.
If you press Delete ALL (White color key) again, all channels of the whole channel list will be
marked to be deleted.
Warning: The deleted channel cannot be recovered unless you search again.
7.6 Sort Channel
In the Main Page, press MENU key on the RCU,
or press Sort key (blue color key) on the RCU
and then open sort options by OK button.
This Sort menu has a sub command and it
allows you to sort the channels, as you like.
You can sort the channels by Alphabet, Satellite,
FTA, Scramble (CAS) and original sequence
(Normal). Place the cursor on the desired line,
and then press OK key.
Check whether the channels are sorted properly
on the channel list.
Note: Radio Channel Manager has the same
operation as TV channel Manager.