User`s manual

- 27 -
8. EPG (Electronic Program Guide)
DX 2202 provides EPG function for you to get
access to the TV Guide (or Radio Guide if you
are listening to radio channels) that will show
the titles and other information of the current
and next programs on different channels. The
information is only available from the network to
which the channel you are watching.
To see the EPG data, press EPG key on your
RCU when watching a channel.
The EPG box will be displayed.
You can see the channel in the PIG screen;
channel list at the bottom side and Program
schedule for selected channel will be displayed
on the right side. The time related to the
program schedule is also displayed.
Detail Info
Select one channel and placing the mark
on
the time of Program name which detail
information you want to know. If there is detail
information of the channel, press Detail Info
(Blue color key) key on the RCU, for the detail
information box to be displayed.
If you want to check the previous or next
information of the channel, please press +6:00
key (Green color key) or –6:00 key (Red color
key) on the RCU.
Note: A ‘No data available” message will be
shown if the selected channel does not provide
EPG data.
Timer programming through EPG
One easy way to program a timer event for
automatic switch on/off is using this Program
Guide menu. Just select the channel line and
mark the event you want to choose and press
Yellow button on RCU to open the Timer Event
window. There you can choose the status of
timer whether it should be one time (Once),
Daily or Weekly. Confirm by OK button.
This timer event will be added to general Timer
menu list (see main menu “Timer”), where you
can edit the data.