User`s manual

- 28 -
9. Timer
In this menu you can program the timer in
various ways. This function is one of the strong
points of DX 2202. One basic condition for the
correct operation of this function is the correct
time displayed at the top right of the timer menu
window.
Time Adjust
Usually you get the information real time from
the satellite automatically but sometimes they
transmit wrong information. In that case, you
have to check the actual time and you may
have to adjust the real time by unplugging the
receiver from power for some seconds..
Time Reservation
Either you can program a timer event through
the EPG data (see EPG) or directly in the Timer
Event Table of this menu. Timer can be
activated by “Once”, “Daily”, or “Weekly” option
in right column.
9 different events can be programmed at
maximum number. Each line is one event
showing the channel, start and stop time.
1. First mark one Timer event line and step by
step move right with arrow buttons on RCU.
2. Type: Select whether you want to drive a
TV or Radio channel
3. Channel: Select channel by opening the
channel list wit OK button.
4. Mon/Date: Use number keys to fix the data
by month and day.
5. Start/Stop: Use number buttons on RCU to
key in the wished start and stop time.
6. Status: Don´t forget to switch the status
from Off to once, daily or monthly.