User`s manual

- 34 -
No picture appears
on the TV scree.
There is interference
on your digtal satellite
channels.
The RCU is not
working.
The systen is connected
by SCART leads and TV is
not in AV/EXT mode.
The systen is connected
using RF leads.
Battery exhausted.
RCU is incorrectty aimed.
If the system is connected
by SCART leads, switch
the TV to the appropoate
AV input.
Check the UHF channel
fixed in your system and
tune the UHF channel
properly.
Change the SRs-5518-GB
output channel to a more
suitable channel , or
connect the system using
SCART leads.
Change the batteries.
Aim the RCU at SRS-
5518-GB, or check that
nothing block the front
panel.
Problem Possible Causes What To Do
The systen is connected
using RF leads and the
output channel of the SRs-
5518-GB interferes with an
existing terrestrial channel
or Video siganl.
Note: If you have tried all of the actions suggested above, and couldn’t solve the problem; please
contact your dealer or service provider.
The system is connected
using RF leads and the
output channel of the
Receiver interferes with
an existing terrestrial
channel or Video signal.
Change the Receiver
output channel to a
more suitable channel,
or connect the system
using SCART leads
Aim the RCU at the
Receiver or check that
nothing block the front
panel.