User`s manual

- 15 -
4.3.1 Manual Search/Edit Transponder
In this menu you can edit, add, delete
transponders or scan a transponder for
channels.
1. Satellite Name: Select first satellite you
want.
2. Transponder: Select desired
transponder.press OK key will display a
down list box which also let's you select
desired transponder.
3. Frequency & Symbol Rate: Edit the
frequency and symbol Rate. You can use
number keys on the RCU to modify
Frequency.
4. Polarization: select HOR or VER
polarization mode.
5. Symbol Rate: Edit the symbol Rate. You
can use number keys on the RCU to
modify symbol rate.
6. Add TP: You can add a new TP into the
list, see below
7. Delete TP: You can delete current
selected TP
8. Delete All TP: You an delete all TPs of the
selected satellite at once.
9. TP Scan: the channel searching process is
starting on selected TP. Select search
type: you can select only FREE channels,
or ALL channels.
NIT Search: set NIT Search ON or OFF.
Then press OK button, the DSR will search
only on this one transponder frequency as
shown below:
10. Antenna Setup: You can jump to the
Antenna setting menu.
Add Transponder
In Manual Search menu, press OK at ´Add TP´
line in the menu, the screen will display a
submenu, in this sub menu, you can add the
frequency and symbol rate, select Hor or Ver
polarization mode to add new transponder.