Compact Prime and Zoom lenses ZEISS Mount Change Instructions
A. Adjusting the flange focal distance to the lens B. Overview Congratulations on the purchase of this Compact Prime CP.2 lens set. We are convinced General instructions that your new lenses will bring you much pleasure and success. • The use of a T6 torque wrench with a torque of 0.4 Nm is strongly recommended. The Compact Prime CP.
C. Changing the mount 1. Remove the rear lens cap. 4. Now you see the colored shims in the groove of the black lens barrel. 2. Remove the four torx screws of the silver EF mount with a T6 torque wrench 5. Place the PL mount on the lens in such a way that the groove on the rear side and place the mount and the screws on one side. of the PL mount fits over the silver screw on the lens barrel.
Instructions on changing to an EF or to any other CP.2 mount 4. Please note the correct orientation of the Micro 4/3 and the E mount to the serial number on the lens barrel. 1. Ensure that the groove on the rear side of the black EF adapter ring fits over the small screw of the lens barrel. 5. Tighten the torx screws using a torque of 0.4 Nm. 2.
D. Adjusting the lens to your camera As the flange focal distance varies from camera type to camera type, it is necessary to adjust 4. Set the distance ring to the test distance according to the tables in the appendix. the CP.2 lens to the camera used when changing the mount or camera model (=shimming). This setting must not be changed during the adjustment process. In order to perform this adjustment, Carl Zeiss provides shims in different thicknesses that are color coded. 5.
E. Appendix 11. Determine the total thickness of the shims that are already installed in the lens groove. Table for shims to adjust Compact Prime CP.2 lenses when used on digital cameras Increase or decrease the total shim thickness according to the tables in the appendix by using Shim color Thickness [mm] silver 0.013 gold 0.019 purple 0.025 light blue 0.032 red 0.038 blue 0.051 white 0.064 green 0.076 orange 0.102 12.
Compact Prime CP.2 15/T2.9 Meter distance scale Compact Prime CP.2 21/T2.
Compact Prime CP.2 28/T2.1 Meter distance scale Compact Prime CP.2 50/T2.1, CP.2 50/T2.1 Macro and CP.2 50/T1.
Compact Zoom CZ.2 70–200/T2.9 Compact Prime CP.2 100/T2.
Compact Prime and Zoom lenses – Accessories and spare parts All interchangeable mount sets include: mount, lens caps, adaption ring with support bracket, screws and a set of shims CP.2. EF mount Indent No. E mount Indent No. Interchangeable Mount Set EF (for CP.2 18/ T3.6) 1846-490 Interchangeable Mount Set E (for CP.2 18 / T3.6) 1907-608 Interchangeable Mount Set EF (for CP.2 21/T2.9, CP.2 25/T2.1, CP.2 28/T2.1 or CP.2 35/T2.1) 1846-492 Interchangeable Mount Set E (for CP.2 21/T2.9, CP.2 25/T2.
Carl Zeiss AG Camera Lenses 73446 Oberkochen Germany www.zeiss.
