User's Manual

ZEISS DTC 3
25 | 38
Safety Instructions and Regulatory Information
Safety instructions for handling when used with a riflescope on a firearm
 Check the legal and regional regulations in your country before using the ZEISS DTC 3 with a riflescope.
 If the ZEISS DTC 3 is connected to an optical device used on a firearm, always ensure that the firearm is unloaded when mounting the ZEISS DTC 3.
 Before using, ensure that your riflescope and the ZEISS DTC 3 are in proper working condition.
 Test the correct setting of the point of impact using controlled shots.
 Improper or inaccurate mounting of the ZEISS DTC 3 on the riflescope may result in a shift in the point of impact, which may affect accuracy.
 An incorrectly adjusted ZEISS DTC 3 may result in a considerable deviation of the point of impact.
Safety instructions for handling
 Look through your riflescope to test if the optics provide a clear, undisturbed image.
 If handled roughly, a maladjustment cannot be ruled out.
 Never point the lens of the device directly at intense heat sources such as the sun or laser equipment. The objective lens and eyepiece can function as a
burning glass and damage the interior components.
 Protection class IP66 is only achieved when all rubber covers are firmly closed.
Danger of swallowing
 Do not place this device in the hands of small children. Incorrect handling can cause small parts to come loose, which may be swallowed.
Safety instructions for the battery
 Handle the device with care: rough handling can damage the internal battery.
 Do not expose the device to fire or high temperatures above 60°C.
 Do not disassemble the device to access the battery. The battery is not meant to be replaced by the end user.
 Only charge the device at temperatures ranging between 10°C and 40°C.
 The battery capacity decreases when operated in a cold ambient temperature. This is not a fault and occurs for technical reasons.
 Do not store the device at temperatures below 0°C or above 35°C for long periods. This permanently reduces the capacity of the battery.
Safety instructions for the power supply unit
 Check the power supply unit and cable for visible damage before use.
 Do not use defective parts and observe the safety instructions for your power supply unit.
For further information, please refer to the user manual and Quick Guide provided. Both are available on our website in the download center:
www.zeiss.com/hunting/downloads
Intended use
The device is intended for mounting in front of an optical device and for displaying heat signatures during nature observation, remote hunting observations
and for civil use. This device is not a toy for children. Use the device only as described in the user manual. The manufacturer and dealer accept no liability for
damage caused by improper or incorrect use.
Legal and regulatory information:
Frequency range of radio module: Bluetooth: 2402–2480 MHz
Power of radio module: 0.2 mW
Carl Zeiss AG hereby declares that the radio equipment types ZEISS DTC 3/25 and DTC 3/38 comply with the directives 2014/53/EU and 2011/65/EU. The full
text of the EU declaration of conformity is available at: http://www.zeiss.de/DTC3/conformity
Some certification marks for standards supported by the ZEISS DTC 3 can be displayed on the screen of the ZEISS DTC 3. To do this, select Menu  System 
Legal Info.
Disposal of batteries
In the European Union, this symbol indicates that the battery used in this product may not be disposed of in domestic waste and must be
collected for disposal separately. When returning used batteries, please use a collection system that may exist in your country and refer to
qualified personnel to have the battery removed from the device.
The materials and substances in the battery may have a detrimental impact on health and the environment.
By depositing empty batteries at a recycling facility, you contribute to the protection and conservation of our environment.
Please only return discharged batteries.
The battery used does not contain mercury, cadmium or lead in quantities exceeding the limits defined in Directive 2006/66/EC.
User information on the disposal of electrical and electronic devices (private households)
The WEEE symbol on products and/or accompanying documents indicates that used electrical and electronic products may not be mixed with
ordinary household waste. For proper treatment, recovery and recycling, take these products to the appropriate collection points where they will
be accepted without charge. In some countries, you may also return these products to your local retailer when you purchase an equivalent new
product. The proper disposal of this product serves to protect the environment and prevents possible harmful effects on human beings and the
environment, which may arise as a result of incorrect handling of waste.
More detailed information on your nearest collection point is available from your local authority. In accordance with state legislation, penalties may be
imposed for the improper disposal of this type of waste.
For business customers within the European Union
Please contact your dealer or supplier regarding the disposal of electrical and electronic devices. He will provide you with further information.
Information on disposal in other countries outside the European Union
This symbol is only applicable in the European Union. Please contact your local authority or dealer if you wish to dispose of this product and ask for a disposal
option.