Specifications

Start-Up
Carl Zeiss Attaching epi-fluorescence illuminator Axiostar plus
2-28 B 40-815 e 12/01
2.11.5 Changing P&C reflector module
The reflector carriage in the epi-fluorescence illuminator must be removed to change the P&C
reflector module.
Removing the reflector carriage:
• Push the reflector carriage lever (2-25/5) to the left or middle position.
• Push up the protective cap (2-25/2) on the epi-fluorescence illuminator (2-25/1) along the groove.
• Push the reflector carriage lever (2-25/5) to the right.
• Turn lock (2-25/3) to horizontal position (open) and pull out the reflector carriage (2-25/4) by the
lock (2-25/3) and place down as shown in Fig. 2-26.
1 Epi-fluorescence illuminator
2 Protective cap
3Lock
4 Reflector carriage
5 Lever for reflector carriage
6 Label for filter combination or pigment
Fig. 2-25 Removing/inserting reflector carriage