Operating instructions

MC 80
DX
Carl Zeiss
B 40-036 d 03/99 2-3
2 OPERATION
The MC 80
DX
Microscope Camera comes packed together with its accessories. Remove all modules
from their packing containers and check for completeness against delivery note. We recommend that
you keep the packing containers for the event that you may have to relocate the equipment, return it to
the manufacturer for repair, or keep it in a storeroom for some time.
It is important that you read the information on "Safe Use of Equipment" (page V)!
2.1 Equipment Installation
2.1.1 MC 80
DX
Microscope Camera for 35 mm film
The equipment is designed to be installed by the user. Proceed as follows:
(1) Attaching the camera adapter
Insert camera adapter (2-1/3, 4, 5, 6) for the MC
80
DX
into the microscope's camera port (2-1/7,
8, 9) as far as it will go, and tighten setscrew (2-
1/10) at the camera port. Mind the following
assignment of adapters:
Use the 44 mm image distance adapter (2-1/5)
on camera ports with 44 mm image distance
(2-1/8).
Use the 60 mm image distance adapter (2-1/4)
on camera ports with 60 mm image distance
(2-1/7).
Use MC 80
DX
– 1,0 camera adapter (2-1/6)
for the Axiovert 25 CA camera port (2-1/9).
Use the 23.2 mm dia. adapter (2-1/3) on the
trinocular tube 452902 (2-1/6) of the Standard
20/25 microscope (image distance 60 mm).
Fig. 2-1 Attaching the camera adapter and
the projection lens