Operating instructions

Carl Zeiss MC 80

2-4 B 40-036 d 03/99

(2)

Inserting the projection lens

Push the projection lens (2-1/1, 2) into the camera adapter (2-1/3, 4, 5, 6) as far as it will go. Mind the

following assignment:

Use projection lens P 2.5 (2-1/2) on 44 mm image distance adapter (2-1/5) or on 60 mm adapter (2-

1/4) or on MC 80

– 1,0 camera adapter (2-1/6).

With Standard 20/25 microscope: Use projection lens PK 2.5 (2-1/1) on 60 mm image distance

adapter (2-1/3).

(3)

Attaching the MC 80

camera body

Attach the MC 80

camera body (2-2/1) on

to the camera adapter with inserted projection

lens (2-2/3), with the body aligned so that the

product name and company logo face you.

Push body down as far as it will go. Lock by

anticlockwise turning of the clamping ring (2-

2/4).

Push plug (2-2/5) of camera body into the

socket labeled CAMERA BODY on the control

console (see section 2.2).

(4)

Attaching the 35 mm Mot

film

cassette

Attach the 35 mm Mot

film cassette (2-2/2)

on top of camera body so that the contact pins

are firmly seated in the jacks (see section 2.1.2).

(5)

Inserting the eyepieces

Push the two focusing eyepieces (one without,

the other with built-in frame size reticle) into

the viewing ports of the trinocular tube as far

as they will go. Align the eyepiece with frame

size reticle so that the frame sides are aligned in

parallel with the camera (see section 2.7).

Fig. 2-2 Attaching the camera body and the

35 mm Mot

film cassette