Operating instructions

MC 80
DX
Carl Zeiss
B 40-036 d 03/99 2-5
2.1.2 The 35 mm Mot
DX
film cassette
(1) Removing the film cassette
Use your two hands to grasp the film cassette on
the right and left, press unlocking button (2-3/2)
until stop using your thumb, and only then pull
cassette off in upward direction.
For No. 135 (35 mm) film you may
use film cartridges with or without
DX
coding. We advise you not to use
bulk film (see section 2.8.1.2).
(2) Inserting the film
Push locking slider (2-3/11) in arrow direction.
This will cause the cartridge holding pivot (2-
3/10) to pop out. Now the D4 databack or plain
cassette back (2-3/6, 7) can be removed.
Insert cartridge (2-3/8) into cartridge
compartment (2-3/9).
Hold the cartridge in place with your index
finger and pull out the film leader until the
insertion marking is reached. Please do not
touch the rubber cladding (2-3/12) with your
fingers !
OPEN
R
R
Fig. 2-3 35 mm Mot film cassette