Operating instructions

MC 80
DX
Carl Zeiss
B 40-036 e 03/99 2-9
(3) Attaching the MC 80
DX
camera body
Attach the MC 80
DX
camera body (2-5/5) on
to the camera adapter with inserted projection
lens (2-5/9), with the body aligned so that the
product name and company logo face you.
Push body down as far as it will go. Lock by
anticlockwise turning of the clamping ring (2-
5/8).
Push plug(2-5/10) of camera body into the
socket labeled CAMERA BODY on the control
console (see section 2.2).
(4) Attaching the M 4 5” large-frame
camera attachment for MC 200
CHIP
/ MC
80
DX
Attach M 4 5” large-frame camera
attachment for MC 200
CHIP
and MC 80
DX
cameras (2-5/1) on top of camera body (2-5/5),
pushing it as far as it will go. Mind the
following:
No lens must be fitted in the camera
attachment.
Red mark on thumbwheel (2-5/2) must face
exactly frontward.
The guide pin (2-5/4) of the camera
attachment must engage with the hole
(2-5/6) of the camera body.
To lock the attachment to the body, turn the
thumbwheel (2-5/2) clockwise. This will move
the locking lug (2-5/3) of the attachment into
the slot (2-5/7) of the body.
(5) Inserting the eyepieces
Push the two focusing eyepieces (one without, the
other with built-in frame size reticle) into the
viewing ports of the trinocular tube as far as they
will go. Align the eyepiece with frame size reticle
so that the frame sides are aligned in parallel with
the camera (see section 2.7).
Fig. 2-5 Attaching the camera body and the
M 4 5" large-frame camera
attachment