Operating instructions

MC 80
DX
Carl Zeiss
B 40-036 e 03/99 2-17
2.3.8 Exposure interruption / Film advance
Pressing the <WIND> button stops any running
exposure. In case of 35 mm film, this is
followed immediately by film advance, while
data exposure is skipped.
Pressing the <WIND> button stops the multiple
exposure mode after an exposure made while
the "D" symbol was on. This is followed
immediately by film advance, while data
exposure is skipped.
Pressing the <WIND> button advances a
35 mm film by one frame even if no exposure
has been made on the present frame. The
empty frame can be used to separate, e.g., two
series of exposures.
2.3.9 Display or input of film speed
Press the <ISO> button to have the current film
speed indicated or to enable film speed input.
Display of current film speed:
Briefly press the <ISO> button to see the
current film speed displayed for 3 s instead
of the exposure mode, exposure time and
exposure correction display.
In case of large-frame micrography, film
speed is constantly indicated elsewhere (see
section 2.4).
WIND
ISO