Operating instructions

MC 80
DX
Carl Zeiss
B 40-036 e 03/99 V
Perfect Micrographs in a Few Steps
Before the first startup, read the section "Safe Use of the Equipment", the description in Chapter 1, and
the installation and operating instructions in Chapter 2!
(1) Switch the MC 80
DX
(installed on the microscope) on (the switch is on the control
console.
For further information, see section 2.2.
(2) Attach film cassette (with film inserted) onto the microscope camera.
For further information, see section 2.1.
(3) Select specimen detail and focus.
For further information, see section 2.8.
(4) Fully automatic exposure control
AUTO
Press
<AUTO>
button.
(5) Enter exposure correction for the respective microscopy method.
DOWN
Press
<DOWN>
button.
(Bright features on a dark background, set DF/FL - 2.)
or
UP
Press
<UP>
button.
(Dark features on a bright background, set BF +1.)
(6) Release micrograph exposure
START
Press
<START>
button. Finished!
Start with step (3) to take the next micrograph,
or
Rewind film and end micrography session.
For further information, see section 2.1.2.