Operating instructions

MC 80
DX
Carl Zeiss
B 40-036 e 03/99 VII
If the protective measures are found to be no longer effective, the equipment must be
switched off and safeguarded against inadvertent operation. For repair, you must contact an
authorized service workshop or the manufacturer.
Soiling and dust may deteriorate the proper function of the equipment You should therefore
protect it against such influences as far as possible. Put the dust cover over the microscope and
camera whenever you are not going to use them for some time.
Do not cover the ventilation slots on the control unit, and do not allow them to get clogged by
dust. Otherwise heat will accumulate inside the unit, which may damage the circuitry or, in
extreme cases, set it on fire. Always check whether the equipment has been switched off
before putting the dust cover on it.
The equipment may only be operated by staff who have been properly instructed about the
use of the camera and microscope and the potential dangers involved in this use in general and
the respective application in particular.
Mind that the
MC 80 DX
is a high-precision optical instrument. Inexpert use or unauthorized
attempts to repair or modify it may easily impair its function or even damage it.
Maintenance, repairs, modifications, removal or exchange of components, or other
interference with the equipment beyond the operations described in this manual may only be
carried out by Carl Zeiss service agency or by personnel expressly authorized by Carl Zeiss to do
so.