Technical data

112 Operation
G-30-1346-en S8 Floor Stand Issue 4.0
Printed on 05. 06. 2001
OPMI
®
PRO magis: assigning a function to keys C and D of the foot
control panel
The two keys C und D of the foot control panel are freely configurable.
In configuration mode 1, you can use the upper and middle sections of the
display and key field to assign any of the following functions to keys C and
D:
FOOT LEFT C:
Use the upper section of the display and key field (FOOT LEFT C:) to as-
sign one of the possible functions to key C of the foot control panel.
FOOT RIGHT D:
Use the middle section of the display and key field (FOOT RIGHT D:) to
assign one of the possible functions to key D of the foot control panel.
Selection
At each press of the "∇" or "∆" key, the program jumps from one possible
configuration to another.
Caution:
Be extremely careful when changing these settings. You should change
settings only under your own user ID. Notify all users of any changes, or
make sure that each user only works under his own user ID.
Saving parameter settings
As soon as you have entered a parameter setting, it is saved under the
current user ID.
Display Function of key C or D of the foot control panel
PHOTO Triggers an exposure at the photo interface, i.e. releases the
shutter of a 35 mm camera, if connected.
AUX Triggers an AUX signal at the AUX interface, e.g. for
switching an external unit on or off.
Path: After you have switched on the instrument, the basic mode is auto-
matically displayed.
To access configuration mode 1 from the basic mode, simultane-
ously press the "MODE" and "STORE" keys.
Path: To return to the basic mode, press the "MODE" key in configuration
mode 1 or do not press any key for 20 seconds.
C
D
Configuration
mode 1
MODE
STORE MANUAL
FOOT
LEFT C:
PHOTO
FOOT
RIGHT D:
PHOTO