Technical data

132 Maintenance / Further information
G-30-1346-en S8 Floor Stand Issue 4.0
Printed on 05. 06. 2001
Care of the unit
Cleaning mechanical surfaces
All mechanical surfaces of the equipment can be cleaned by wiping with
a moist cloth. Do not use any aggressive or abrasive cleaning agents.
Wipe off any residue with a mixture of 50% ethyl alcohol and 50% distilled
water plus a dash of household dish-washing liquid.
Sterilization
The asepsis sets available from Carl Zeiss contain rubber caps, sleeves
and grips which can be sterilized in autoclaves. We recommend the follo-
wing program for sterilization:
Sterile single-use drapes are available to cover the surgical microscope.
N
ote:
When draping the system, make sure there is enough slack in the drapes
to allow for movement of the microscope carrier and surgical microscope.
It is especially important that the drape is completely loose around the
handgrips. The surgeon must be able to operate the keys through the
drape.
Sterilization temperature: 134° C
Sterilizing time: 20 minutes