Technical data

44 Description
G-30-1346-en S8 Floor Stand Issue 4.0
Printed on 05. 06. 2001
7 Brightness control
Brightness can be adjusted using the two keys (7) on the control
panel.
Note:
You can also adjust the brightness of lamp 1 or 2 by pressing the ap-
propriate key on the foot control panel.
8 Yellow indicator lamp
– Lights when the main lamp has failed. The backup lamp is on.
– Blinks when the backup lamp has failed.
9 Green indicator lamp
Indicates which illumination system is on.
10 Selector:
After the instrument and one of the illumination systems have been
switched on:
– If the yellow indicator lamp is lit, the main lamp has failed.
– If the yellow indicator lamp blinks, the backup lamp has failed.
Note:
You can set the selector in such a way
– that one illumination system each can be switched on the left-hand
and right-hand side of the foot control panel,
– or that both illumination systems can be switched on the left-hand or
right-hand side of the foot control panel.
Illumination is off.
Illumination is on.
Illumination can be switched on/off on the left-hand side of
the foot control panel.
Illumination can be switched on/off on the right-hand side of
the foot control panel.