Technical data

48 Description
G-30-1346-en S8 Floor Stand Issue 4.0
Printed on 05. 06. 2001
5 Brightness control
You can adjust the brightness using the two control keys on the control
panel.
Note:
The brightness of the xenon lamp can also be adjusted by pressing
the appropriate keys on the foot control panel.
6 Yellow indicator lamp
Lights when the lamp has failed. After activation and ignition of the
backup lamp, the yellow indicator lamp goes out again.
Note:
If the first lamp has failed and the backup lamp is in use, make sure to
have a backup lamp module ready at hand as a precaution.
7 Green indicator lamp
Lights when the illumination has been switched on.
8 Selector:
Note:
You can adjust the selector in such a way that you can switch the illu-
mination on/off on the right-hand and left-hand sides of the foot control
panel.
Illumination is off.
Illumination is on.
Illumination can be switched on/off on the left-hand side of
the foot control panel.
Illumination can be switched on/off on the right-hand side of
the foot control panel.