Technical data

56 Preparations for use
G-30-1346-en S8 Floor Stand Issue 4.0
Printed on 05. 06. 2001
Connections
You can attach different types of surgical microscope to the ceiling mount
(floor stand). The procedure of mounting the surgical microscope is al-
ways the same despite the different microscope versions.
Please also see the user's manual of your surgical microscope for the de-
scription of the mounting procedure.
Connecting the surgical microscope
• Turn locking cap (1) by a quarter turn to the right or left and pull up cov-
er (2).
• Plug microscope connector (3) into connector (4) and tighten the se-
curing screws on the microscope connector.
• Press the microscope cable into cable clip (5). Install the cable in such
a way that it is neither stretched nor kinked when the microscope is
turned or tilted.
• Press down cover (2) as far as it will go and lock it with cap (1).
Connecting the S light guide
• Insert the end of the light guide as far as it will go into the light guide
socket (7) of the microscope, and press the light guide into the cable
clip (6).
Note:
Make sure that the light guide is not stretched or kinked when the micro-
scope is turned or tilted.