Technical data

68 Operation
G-30-1346-en S8 Floor Stand Issue 4.0
Printed on 05. 06. 2001
Relocating the stand
Note:
As it is very easy to move the stand, there is a tendency to underestimate
its weight. For this reason, move the stand slowly and carefully!
Please observe the following points when relocating the stand:
• Switch off the illumination using the relevant knobs. Press the power
switch to switch off the system.
• Unplug the power cord from the power outlet.
• Wind up the cable of the foot control panel on the two brackets and
hang the foot control panel on the upper bracket.
• Wind up the power cord on the two brackets.
• Use the maneuvering handle for moving the stand.
• Be careful of heights when passing through doorways.
• Avoid collisions of any kind.
• Do not go over steps and edges: the stand might topple!
• Be extremely careful when moving over slopes.
• Do not park the stand on slopes.
• At the new location, press the brake to secure the stand in position.