Technical data

G-30-1346-en S8 Floor Stand Issue 4.0
Printed on 05. 06. 2001
Operation 97
Control functions for OPMI
®
VISU 150 and VISU 200
The control functions for OPMI
®
VISU 150 and OPMI
®
VISU 200 have
been combined in 4 modes:
The individual control functions will be described in the following.
"STORE" key
In the basic mode and speed mode, the current zoom setting of the sur-
gical microscope can be stored for the user currently selected.
The "STORE" key has no function in the configuration modes.
The current zoom value is saved as zoom memory (ZOOM-MEM).
You can set the instrument to this stored zoom value by pressing key C
or D on the foot control panel if the XYZ-RES function has been assigned
to one of these keys in configuration mode 1. You can also set the stored
zoom value using the RESET key on the X-Y coupling.
Caution:
Be extremely careful when changing these settings. You should change
settings only under your own user ID. Notify all users of any changes, or
make sure that each user only works under his own user ID.
Basic mode
– Setting the brightness of lamp
1
– Setting the brightness of lamp
2
– Setting the user ID
Speed mode
– Selecting the speed for focus-
ing
– Selecting the speed for the
zoom function
– Selecting the speed for the X-Y
coupling
Configuration mode 1
– Assigning a function to key C
on the foot control panel
– Assigning a function to key D
on the foot control panel
– Setting the focusing speed as
a function of the zoom setting
Configuration mode 2
– Selecting the magnetic clutch-
es to be released when the re-
lease key on the handgrip is
pressed.