Technical data

98 Operation

G-30-1346-en S8 Floor Stand Issue 4.0

Printed on 05. 06. 2001

OPMI

VISU 150 / 200: setting the lamp brightness

This control function permits you to select the brightness of the lamp.

OPMI

VISU 150 and OPMI

VISU 200 are equipped with two illumina-

tion systems: lamp 1 and lamp 2. In the basic mode, the current bright-

ness setting of lamp 1 is displayed in the top display. The middle display

shows the current brightness setting of lamp 2.

Changing the settings

Use the "∇" and "∆" keys to change the brightness of the lamps.

The brightness can be adjusted in a range from 0.1 to 1.5 in steps of 0.1.

At brightness level 1.0, a beep is emitted. The illumination intensity of

level 1.0 corresponds to 500 mW/cm

sr as per the future ISO standard.

Acoustic signals in OPMI

VISU

A beep is emitted:

– after the ceiling mount (floor stand) has been switched on, if the bright-

ness of one lamp has been set to level 1.0 or higher.

– during adjustment of the lamp brightness, when brightness level 1.0

has been reached.

Saving parameter settings

As soon as you have entered a parameter setting, it is saved under the

current user ID.

Path: The basic mode is automatically displayed after the instrument has

been switched on.

Basic mode

MODE

STORE MANUAL

USER

0.7