User Guide

6
The MAS3 Command Set
Power Control
P0<CR> Turn off power
P1<CR> Turn on power
P+<CR> Toggle power
P?<CR> Request power status
Select Channel
C1<CR> Select Channel 1 (Note 1)
C2<CR> Select Channel 2 (Note 1)
C3<CR> Select Channel 3 (Note 1)
C+<CR> Select the next higher channel (Note 2)
C-<CR> Select the next lower channel (Note 2)
C?<CR> Request current channel status (Note 3)
Note 1: If power is off, this command will turn on power and then select the specified channel.
Note 2: If power is off, this command will be ignored.
Note 3: Returns channel status, if power is off, returns channel to be selected when power is applied.
Set Front Panel Lamp Intensities
L0<CR> Set lamps to the dim setting
L1<CR> Set lamps to the bright setting
L2<CR> Set lamps to the auto-dim setting
L+<CR> Cycle through intensity settings
L?<CR> Request the current intensity status