Operation Manual

Juice extractor maintenance rules
Clean carefully after each usage, to prevent drying of juice and fruit remains.
Remove the dirt from the corners with a bottle brush or tooth brush.
Clean the motor with damped cloth sprinkled with washing up liquid. Then dry it.
The exception is a filter (4). It should be washed with hard brush
(10) only, which is included to this juice extractor equipment. Do
not use any metal brushes to clean the filter!
The following elements of the equipment: juice bowl, insert, lid, pusher and the juice
collector should be washed in hot water with wash-up liquid.
You can clean them in dishwashers in maximum temperature 60ºC.
When water or juice getting into the motor, stop operation immediately and bring the
appliance to service for inspection.
47
Some elements can change their colour after long-term usage. It is not a defect.
Colour from carrot can be removed by cleaning the surface with a cloth immersed in
edible oil.
Dry carefully all parts after cleaning.
Pay a special attention to transparent plastic parts. They are the most
sensitive for hits and falls. They can be easily damaged then.
Assemble the juice extractor according to instruction mentioned above (see
„Preparing for operation”).
The juice extractor does not work:
− Bring the juice extractor to service agent.
The juice extractor extracts little juice or vibrates:
− Use the TURBO function. If the problem still exists, switch the appliance off; clean
the filter from accumulated pulp.
Additionally, empty the pulp collector if it is full.
− In case of mechanical filter damage, implicitly replace it with a new one.
What to do when ...