Operation Manual

Juice extractor assembly

Assemble the bowl on the motor so that the four openings at the bottom ﬁ t the bolts situated in the –

corners of the motor.

Assemble the sieve housing so that the pulp removing opening is situated opposite the bowl –

discharge.

Press the sieve to the center of the housing and check if is properly installed and if it rotates easily. –

Assemble the lid so that the protruding part covers the pulp opening. –

Join the elements by closing the clamps. –

Lift both clamps and insert the fastenings in the openings of the lid –

Press the clamps to the housing (you will hear a characteristic click). –

Place an appropriate utensil under the bowl discharge. –

Operating the juice extractor

Check if the switch is in the „ – 0” position.

Plug in the appliance and switch it on. –

Place the product to be processed into the feeding tube and gently press with the pusher. –

Cleaning the sieve – model 177.T, model 177.TSL

If too much pulp gathers during the extraction, it can cause the appliance to vibrate. In such a case:

Press and hold the „ – Turbo” button for 1.5–2 seconds – the motor will operate on high gear which

will help to clean the sieve.

After releasing the „ – Turbo” button, place the switch in the „ON” position – the motor will return to

normal operation.

The „Turbo” function may be used only in 10 second intervals.

After operation

Switch off the appliance –

Unplug the appliance. –

Dismantle the parts – as in the case of the initial wash. –

Cleaning and maintenance

Wash the juice extractor thoroughly after each use. Do not allow the juice and fruit or vegetable –

pulp to dry.

Wipe the housing with a damp cloth with dishwashing liquid. –