Operation Manual
37WP-001_v02
diameterof120mmandappropriateductclampswhichare
tobepurchasedininstallationmaterialssupplystores.The
installationshouldbeperformedbyaqualiedtter.
Settingtheodorabsorberoperationmode
Inthisoption,lteredairisfedbackintotheroomthrough
thefrontopenings ofthehood.Tosetthe odourabsorber
mode,installtheactivatedcarbonlterandswitchthelever
locatedatthemotoroftheunitfromuppertolowerposition
(Fig.
C
).
Thespeedofthefan
Thelowestandmediumspeedsettingsareusedinnormal
conditions and low cooking fume intensity. The highest
speedsettingshouldbeusedonlyincaseofanintenselevel
ofcookingfumese.g.duringfryingorgrilling.
Operation
Controlpanel
The cooker hood can be controlled using an integrated
switch.
0–motoroff,
1–rstoperationspeed,
2–secondoperationspeed,
3–thirdoperationspeed,
–lighton/off.
Thisadjustmentallowstosettheoptimalfanspeedforthe
user’sneedswithaminimalnoiselevel.
Cleaning and maintenance
Maintenance
Regular cleaning and maintenance will guarantee a good
andfailure-freeoperationofthecookerhoodandwillprolong
itsusefullife.Makesurethealuminumltersandtheactive-
coal lters are replaced according to the manufacturer’s
recommendations.
Anti-greasealuminumlters
Cleaning
In case of a normal operation of the cooker hood, the
aluminum anti-grease lters should be cleaned every two
monthsinadishwasherormanuallywiththeuseofamild
detergentorliquidsoap.
Replacement
Todismantlethelters:
●
Removethelowercoverbyreleasingthecatch.
●
Takeoutthealuminumanti-greaselter.
Coallter(availableatsalesnetwork)
Operation
Coal lters are used only when the cooker hood is not
connectedtotheventilationduct.
D
E
Active-coallterscanabsorbodorsuntiltheyaresaturated.
Active-coal lters cannot be washed or regenerated; they
shouldbereplacedatleasteverytwomonthsormoreoftenif
thecookerhoodisintensivelyused.
Replacement
●
Removethealuminumanti-greaselter.
●
Install the carbon lter from the inner side of the
aluminumanti-greaselter.
●
Install the aluminum anti-grease lter together with
the carbon lter in the body of the ventilation hood in
suchaway that thecarbonlterissituated inside the
ventilationhood.
Lighting
Lightingsystemconsistsalightbulbwithapowerof28W.
Inordertoreplaceadamagedlightbulb:
●
Unplugtheappliance.
●
Remove the aluminum lter from the cooker hood
housing.
●
Replacethedamagedlightbulbusingaclothorpaper.
●
Reinstallthealuminumlter.
Cleaning
Duringthenormalcleaningprocessdonot:
●
Usesoakedcloths,spongesorrunningwater.
●
Use solvents or alcohol, as they may tarnish the
lacqueredsurfaces.
●
Use corrosive substances, especially for cleaning
stainlesssteelsurfaces.
●
Useahard,roughcloth.
Itisrecommendedtouseadampclothandneutralcleaning
agents.
Ecology – environment protection
Eachusercanprotectthenaturalenvironment.Itisneither
difcultnorexpensive.
Inordertodoit:putthecardboardpacking
into recycling paper container; put the
polyethylene (PE) bags into container for
plastic.
When worn out, dispose the appliance
to particular disposal centre, because of
thedangerous elementsofthis appliance,
whichcanbehazardousfornaturalenvironment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any
damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product
any time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.