User's Manual

Flat size (W×H): 11.25 x 4.5 in (285.77 × 114.3 mm.)
Final folded size: 3.75 x 4.5 in (95.25 × 114.3 mm.)
PACKAGE CONTENTS
• Wireless controller
• Dongle
• AAA batteries (2)
• Quick Setup Guide
CONNECTING YOUR CONTROLLER
1 Insert the dongle into your NES Classic or SNES Classic. The dongle LED
turns red.
2 Turn the controller on by sliding the OFF/ON switch. The controller LED
blinks quickly while your controller automatically pairs with the dongle,
then lights solid when pairing is complete.
FEATURES
• Compatible with SNES Classic and NES Classic (these won't work with the
original versions of these systems)
your console
• Powered by 2.4GHz wireless technology
• Powered by two AAA batteries (included)
COMPATIBILITY
This controller is compatible with the SNES Classic and NES Classic consoles.
The X, Y, L, and R buttons are not compatible with the NES Classic.
INSTALLING THE BATTERIES
1 Remove the battery cover on the back of the controller.
2 Insert two AAA batteries (included) as shown below into the battery
compartment.
3 Reinsert the battery cover.
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
Wireless
Controller
Dongle LED
Dongle LED
OFF/ON switch
Controller LED
Blinks quickly:
Automatic pairing process
Lights solid:
Pairing successful
Blinks slowly:
Low power
SNES ClassicNES Classic
OR
NS-GSNESWLC18_-C _17-0695_QSG_V1_EN.ai 1 9/18/2017 3:02:01 PM
V1
FINAL
FOR PRINT