User Manual

13
3. Scan the QR Code located on the device. If you
are unable to scan the QR code, you can
manually enter the serial number of the camera
into the app by tapping on the Manually enter
SN button.
4. Make sure the light on the front of the camera
is blinking green, this will indicate the device is
ready to be added to the Zencam Security app.
Tap “Next” to continue.
Note: Do NOT scan the QR code information directly from the box, it will not work. Please scan the QR
code located on the back of the S/N tag on the camera.
5. Set the password for your camera in the
password setup menu. A recovery email can be
set if you lose or forget your password. Tap “OK”
to continue.
6. Choose your Wi-Fi network from the Choose
Wi-Fi Network menu.