User Manual

14
7. Enter the password for your Wi-Fi network.
The password can be saved to the app by tapping
the “Save Password” checkbox. Tap “Connect” to
continue.
8. The LED on the front of the camera will turn
solid green once connected to your Wi-Fi
network. Tap “Next” to continue. If the camera
does not connect, tap “Start Over” to try again.
9. Give your camera a name. Type in a name for
your camera, a few examples are provided such
as, bedroom, living room, or office. Tap “Save” to
continue.
10. The time zone for your camera will be
automatically provided in the app. To enable DST
(Daylight Savings Time) enable the DST toggle
switch. Enabling “Save as Default” will save your
time zone settings for future use. Tap “Next” to
continue.