User Manual

24
The red "Alarm" line is the number of dBs needed for the camera to trigger an alarm/notification to
your mobile device. Once the graph reaches above the alarm line an alarm/notification will be sent to
your mobile device. This can be adjusted by sliding the red "Alarm" bar up or down the graph.
Using the Always On Mode
Tap on the Always On tab to access the Always On interface. Since the app will always be producing
sound from the camera the gray "Squelch" line will not be available in this menu. The red "Alarm" line
however can be adjusted up and down the graph to determine when an alarm/notification will be
triggered and sent to your mobile device.