User Manual

58
O: Indicates that the concentration of the hazardous substance in all homogeneous materials in the
parts is below the relevant threshold of the SJ/T11363-2006 standard.
X: Indicates that the concentration of the hazardous substance of at least one of all homogeneous
materials in the parts is above the relevant threshold of the SJ/T11363-2006 standard. During the
environmental-friendly use period (EFUP) period, the toxic or hazardous substance or elements
contained in products will not leak or mutate so that the use of these (substances or elements) will not
result in any severe environmental pollution, any bodily injury or damage to any assets. The consumer is
not authorized to process such kind of substances or elements, please return to the corresponding local
authorities to process according to your local government statutes.
Note:
● For detailed operational instructions, please refer to the User Manual that was included in your
purchase.
● To view setup videos for many of the steps outlined in this guide, go to http://zencam.com/support
● This user manual is for reference only. Slight differences may be found in the user interface.
● All the designs and software here are subject to change without prior written notice.
● All trademarks and registered trademarks mentioned are the properties of their respective owners.
To contact Zencam support, please do one of the following:
Visit http://zencam.com/contacts and use the email form
Call Zencam Support using one of the following numbers:
Toll Free US: [phone]
International (Outside of US): [phone]
USA: 713-893-8956
Canada: 437-888-0177
UK: 203-769-2757
Email Zencam Customer Support [e-mail]
Copyright Zencam© 2020