User Manual

7
2.1.1. Inserting a MicroSD Card
Step 1: To access the micro SD card slot for your camera you will need to tilt the camera into the up
position (90°). The slot will then be visible.
Step 2: Please ensure the gold pins are face down when inserting the SD card into the camera.
Step 3: Please firmly press the SD Card into the SD Card slot until it holds. The SD card will lock into
place, this indicates that the SD is installed properly.
Step 4: To release the SD card from the SD card slot, simply press on the inserted SD card in until it is
released from its SD card slot. You may then take the card out of the slot.
3 Connection & Installation
This section provides information about the connection and installation of your camera.
3.1 Connection Guide
The camera initially should be connected via the following method:
 The following figures are for reference only, please refer to the actual device for more details.
 Before installation, please make sure the installation surface can at least support 3x weight of the
camera.
The device can adopt two types of installation mode which are desktop installation and ceiling mount.
Desktop Installation
Desktop installation refers to utilizing your camera on a flat surface. For desktop installation, place your
camera on a surface that will not be easily disturbed. Ensure that the surface area is close to a power
outlet since the device will require a power adapter to function.