User Manual

8
Ceiling Installation
For instructions on how to mount your camera to a ceiling or other area that require the camera to be
secured to a mounting surface, please refer to the instructions set provided below:
The exact installation steps are shown as follows:
Step 1: Drill holes on the proper installation surface according to the hole sites on the quick installation
board.
Step 2: Knock the expansion bolts provided in the kit into the drilled holes.
Step 3: Use self-tapping screws to fix the quick installation board well.
Step 4: Connect to device power.
Step 5: Adjust the monitoring angle and stick the device on the quick installation board.
Note:
 This connection guide is for reference only. Slight difference may be found in user interface.
 All the designs and software here are subject to change without prior written notice.
 All trademarks and registered trademarks mentioned are the properties of their respective
owners.
 If there is any uncertainty or controversy, please refer to the final explanation of us.
 Please visit our website or contact your local service engineer for more information.