Instruction manual

72 73
ENGLISH
72 73
ENGLISH
18. Alternative frequency (AF) indicator: Touch to activate/deactivate the AF function.
19. Traffic announcement indicator: Touch to activate/deactivate the TA function.
20. Z Touch to activate/deactivate the REG function.
21. PS indicator.
22.
[
PTY indicator.
23.
K
Touch to activate/deactivate the SCAN function.
24.
h
Touch to choose between STEREO and MONO.
SWITCH TO RADIO TUNER SOURCE
■ Press the SRC button on the front panel or on the remote control to switch to the tuner
source.
SELECT FM/AM BAND
■ Touch the BAND button
A
on the screen, or press the BAND button on the remote
control to change among the following bands:
FM-1, FM-2, FM-3, AM-1.
AUTO TUNING
■ Press the
[] button on the remote control or touch the f button on the screen to seek
the next available channel by increasing the tuning frequency. Press the button again to
stop searching.
■ Press the [] button on the remote control or touch the g button on the screen to seek
the next available channel by decreasing the tuning frequency. Press the button again to
stop searching.
MANUAL TUNING
■ Touch the
D
or
C
button to increase or decrease the tuning frequency one step.
USING PRESET STATIONS
■ 6 numbered preset buttons store and recall stations for each band. Front 6 stored
stations (P1-P6) for the current band appear on the screen, touch the channel directly
for use.
■ You can touch the arrow
buttons on the screen to select other stations.
Storing a station
1. Select a band (if needed), then select a station.
2. Touch and hold an on-screen preset button for three seconds. The preset number appears
at the top of the screen.
Recalling a station
1. Select a band (if needed).
2. Touch an on-screen preset button to select the corresponding stored station.
ZE-MC172 Manual D+E-CS3.indd 73 06.09.2007 11:14:17 Uhr