Operation Manual

24
SYSTEM SETUP (COnTinUED)
BT SETTINGS
Pair: On, Off
Touch [On] or [Off] to toggle auto-pairing on
or off.
Auto Connect: On, Off
Touch [On] or [Off] to toggle auto-connect on
or off.
Auto Answer: On, Off
Touch [On] or [Off ] to toggle auto-answer on
or off.
PIN Code:
Touch to set the password to connect to
other Bluetooth devices.
MIC: Internal, External
Touch [Intern] or [External] to select internal
or external microphone. If no mic is connected
this is greyed out and can´t be used.
PC_BT Update
Enable an update of the Bluetooth software
(Bluetooth software write protection off/on).
Reset: On
Touch [On] to load default BT settings.
OTHER SETTINGS
TS: Adjust
Touch [Adjust] to calibrate the screen.
When the touch-screen operation is not
sensitive or exact enough, you should
calibrate the touch screen using the “TS
Calibrate” function.
SYS_Password: Set
Function to set the system password.
Touch [Set] to pop up the keypad, then set
the system password using the number
buttons.
Touch
to erase previous number.
Touch
to con rm. The original
password is “012345“.
To reset the password, you should enter
the original password  rst, then input a new
password, touch
to con rm it and input
the password again to con rm it.