User manual

8 9
ZE
-
N C 4 612
BASIC OPERATION
SELECT A SOURCE
Enter main menu:
- Via Touchscreen:
Touch the icon in the upper left corner of the screen.
- Via "HOME" button:
Push "HOME" button to enter main menu.
Operation at main menu:
The main menu consists of three pages: 2 main pages and 1 M-Zone page.
There are two basic ways to get there:
- Slide You can slide the two main pages back and forth.
Just slide your fingertip onscreen in the respective direction.
The M-Zone page (backseat area) cannot be accessed
via sliding.
- Bar Tap on any of the three rectangular markers in the top area of the
screen to navigate through all three main menu pages. M-Zone
included.
Entering the main menu you have access to all playback sources and settings.
ADJUST LOCAL LANGUAGE
Tap center header button or slide to second main menu page. Choose SETUP
> GENERAL > LANGUAGE and adjust to your likings. You might want to adjust
some other basic settings. See chapter "Setup".
POWER ON/OFF
Main menu 1 Main menu 2 M-Zone page
Correctly installed, your device will power on together with the ignition of the vehicle.
Ignition off: Device does not receive power. When the ignition is activated, you may
also switch the device On and Off using the front panel power button.
BASIC OPERATION
BASIC OPERATION
Display & control elements:
 Indicates current source
- Tap to enter main menu
 Indicates when NAV infobar is available
- Tap to display NAV infobar
- Tap again to hide it
 Connected mobile phone battery
status.
 Mobile phone GSM reception fi eld
strength

Basic elements (for all playback sources)
Three infobar styles:
NAV infobar Playback infobar BT infobar
NOTE:
■ Press and hold the NAV button to fade in/out the infobars manually.
Touch the
icon to fade out the infobars manually.
■ NAV infobar is only available during active route guidance.
■ An incoming call or new playback information triggers the automatic
pop-up of the other infobar types at NAV screen. They will fade out after
fi ve seconds.