User manual

49
ZE-NC5010
1. MODE
■ After you have activated M-Zone in the
main menu, press the MODE button
to choose the playing mode for the
rear zone.
2. NUMERIC KEYPAD
■ Search function. Use Onscreen-Key-
board to specify target.
3. MUTE
■ Press the MUTE-Button to mute the
audio output.
4. GOTO SEARCH
■ Position search function for
CD/DVD mode.
5. TITLE
■ Enter the title menu of the DVD.
■ Scan function for CD mode. Each track
will be played back for 10 seconds.
6. ROOT
■ Enter the main menu of the DVD.
■ Turn on PBC while playing VCD.
7. OK
■ Start or pause the playback.
■ Con rm the selected adjustment.
8. DIRECTION BUTTONS
■ Up/Down/Left/Right to select an item
to adjust.
9. PREVIOUS
■ Press the PREVIOUS-Button to choose
the previous track/chapter.
10. NEXT
■ Press the NEXT-Button to choose the
next track/chapter.
11. STOP
■ Stop playback.
12. PLAY/PAUSE
■ Start or pause the playback.
13. ZOOM
■ Zooming in/out an image
("+1", "+2", "+3", "OFF").
14. FAST REVERSE
■ Fast reverse the disc content
("2X", "4X", "8X", "16X").
15. FAST FORWARD
■ Fast forward the disc content
("2X", "4X", "8X", "16X").
16. SLOWER PLAY
■ Activate the slow-motion function.
17. REPEAT
■ Press the REPEAT-Button to repeat the
track/folder/chapter/disc playback. Press
PLAY to deactivate.
18. AUDIO
■ Change the audio language for DVD
playback (if available).
19. SUB-T
■ Language selection for DVD subtitle
(if available).
20. ANGLE
■ Change between different angles for a
scene (if available).
21. REPEAT A -> B
■ Set start point A and end point B to
repeat continually.