GPS NAVIGATION SYSTEM MAIN USER MANUAL ENGLISH
Thank you for choosing our product as your navigator. Start using your device right away. This document is the detailed description of the navigation software. You can easily discover the software while you are using it; however, we still recommend that you read this manual to fully understand the screens and features.
Table of contents 1 Warnings and Safety information .........................................................................6 2 Getting started .........................................................................................................7 2.1 Navigation menu ............................................................................................................ 8 2.2 Buttons and other controls on the screen ....................................................................... 9 2.2.
3.1.6 Selecting a recent destination from the History ................................................................. 48 3.1.7 Entering the coordinate of the destination ......................................................................... 49 3.1.8 Building a route from the list of destinations (Create Route) ............................................ 50 3.2 Viewing the entire route on the map ............................................................................ 51 3.
4.3.9 Regional settings ................................................................................................................ 80 4.3.10 Trip monitor settings........................................................................................................ 80 4.3.11 Log collection settings ..................................................................................................... 81 5 Glossary .....................................................................................
1 Warnings and Safety information The navigation system helps you find your way to your destination with the built-in GPS receiver. The software does not transmit your GPS position; others cannot track you. It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you operate your software before you start your journey. Plan the route before your departure and stop if you need to change the route.
2 Getting started The software is optimised for in-car use. There is no need to use a stylus. You can use it easily by tapping the screen buttons and the map with your fingertips. When using the navigation software for the first time, an initial setup process starts automatically. Do as follows: 1. Select the written language of the application interface. Later you can change it in Regional settings (page 80). 2. Read the End User Licence Agreement. Tap 3. The Configuration wizard starts. Tap 4.
7. The initial setup is now complete. The Configuration wizard can be restarted later from the Settings menu (page 72). 8. The software offers you to watch the tutorial that leads you through the basic steps of navigation. Tap if you would like to get an instant understanding of the functions of your software. You can run it later if you choose . After the initial setup, the Navigation menu appears and you can start using the software. 2.
x Tap to open the Traffic Summary screen. 2.2 Buttons and other controls on the screen When you are using the software, you usually tap buttons on the touch screen. You only need to confirm selections or changes if the application needs to restart, it needs to perform a major reconfiguration, or you are about to lose some of your data or settings. Otherwise, the software saves your selections and applies the new settings without confirmation as soon as you use the controls.
When a feature can be set to different values in a range, the software shows an indicator on a gauge that displays and sets the value. Slider x Drag the handle to move the slider to its new position. x Tap the slider where you want the handle to appear; the thumb jumps there. Each key is a touch Alphabetic and screen button. alphanumeric keyboards to enter text and numbers. Virtual keyboard 2.2.1 Using keyboards You only need to enter letters or numbers when you cannot avoid it.
Cancelling the keyboard entry (returning to the previous screen) . Tap 2.2.2 Beyond single screen tap You usually need to tap the screen only once. However, some useful features can be accessed with combined touch screen tapping. Those are the following: Action Tapping and holding the screen Details Tap and keep pressing the following buttons to reach extra functions: x Tap and hold the Map screen appears.
2.3 Map screen 2.3.1 Navigating on the map The Map screen is the most frequently used screen of the software. A small live map is displayed on the startup screen, the Navigation menu, as a part of the button. To enlarge this small map and open the Map screen, tap . This map shows the current position (the Vehimarker, a blue arrow by default), the recommended route (an orange line), and the surrounding map area. When there is no GPS position, the Vehimarker is transparent.
Tap any of the data fields to suppress others and display only the selected one. The data fields are different when you are navigating an active route and when you have no specified destination (the orange line is not displayed). Default data fields when cruising without a destination (tap and hold any of the fields to change its value): Field Description Shows your current speed given by the GPS receiver. Shows the speed limit of the current road if the map contains it.
2.3.2 Position markers 2.3.2.1 Vehimarker and Lock-on-Road When your GPS position is available, the software marks your current position with the Vehimarker. By default, this marker is a blue arrow, but you can change this icon in Settings. The Vehimarker may not show your exact GPS position and heading. If roads are near, it is aligned to the nearest road to suppress GPS position errors, and the direction of the icon is aligned to the direction of the road. 2.3.2.
There is a field in the top left corner that displays the next manoeuvre. Both the type of the event (turn, roundabout, exiting motorway, etc.) and its distance from the current position are displayed. A smaller icon shows the type of the second next manoeuvre if it is near the first one. Otherwise, only the next manoeuvre is displayed. Most of these icons are very intuitive. The following table lists some of the frequently shown route events.
Approaching the destination. 2.3.3.3 Lane information and Signposts When navigating on multilane roads, it is important to take the appropriate lane in order to follow the recommended route. If lane information is available in the map data, the software displays the lanes and their directions using small arrows at the bottom of the map. Highlighted arrows represent the lanes you need to take. Where additional information is available, signposts substitute arrows.
2.3.3.5 3D object types Your software supports the following 3D object types: Type Description 3D terrain 3D terrain map data shows changes in terrain, elevations or depressions in the land when you view the map in 2D, and use it to plot the route map in 3D when you navigate. Hills and mountains are shown in the background of the 3D map, and illustrated by colour and shading on the 2D map.
2.3.3.7 Traffic events Road segments affected by traffic events are displayed with an alternate colour on the map, and small symbols above the road show the nature of the event: to open the Traffic Summary screen.
2.3.4 Manipulating the map Tap the map anywhere to browse it during navigation. The map stops following the current position (the Vehimarker, a blue arrow by default, is not locked in a fix position on the screen any more) and control buttons appear to help you modify the map view. Action Moving the map with drag&drop Button(s) No buttons Zooming in and out , Description You can move the map in any direction: tap and hold the map, and move your finger towards the direction you want to move the map.
Compass in 2D map view mode Compass in 3D map view mode , The direction of the compass shows North. Tap the button to switch to North-up view, and then tap again to rotate the map in the previous direction. , The direction of the compass shows North. Tap the button to switch to North-up view, and then tap again to rotate the map in the previous direction. Location information Tap this button to open a new screen with information about the selected map point, the Cursor.
There are more functions available than the number of buttons in the menu. In Settings, you can choose the function of each button (page 74). The following options are available: Button Description Shortcut for This function lets you search for a Place along your Find / Find Places / Quick Search (page route or around your current location if there is no route 35) calculated. This button opens the list of your Favourite destinations. Find / Favourite (page 46) This button opens the History list.
This button opens the Traffic Summary screen. Tap the Traffic icon in the Navigation menu or on the Map screen. This button lets you bypass parts of the recommended My Route / Avoidances route. This button opens the Trip Monitor screen where you More / Trip Monitor can manage your previously saved trip logs and track (page 1) logs. This button opens the list of manoeuvres (the itinerary). Tap the top of the Map screen during navigation.
2.3.6 Checking the details of the current position (Where Am I?) Opened from the Quick menu, this screen contains information about the current position (or about the last known position if GPS reception is not available) and a button to search for useful Places nearby. Information on this screen: x , format). x : Altitude (elevation information coming from the GPS receiver - often inaccurate). : Latitude and Longitude (coordinate of the current position in WGS84 x : House number on the left.
The following services can be searched around the current position or the last known position: x : Car repair and roadside assistance services x : Medical and emergency services x : Police stations x : Petrol stations Tap any of the buttons, select a Place from the list, and navigate to it.
3 Navigating You can set up your route in different ways: x If you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation). x You can also plan a route independently of your current GPS position or even without GPS reception (to achieve this, you need to turn off the GPS receiver and set a new starting point in My Route / Edit Route by tapping the flag icon at the current position). You can plan routes with multiple destinations.
3.1.1.1 Entering an address To enter an address as the destination, do as follows: 1. If you are on the Map screen, tap menu. 2. In the Navigation menu, tap the following buttons: 3. By default, the software proposes the country and settlement where you are. If needed, to return to the Navigation , . tap , enter the first few letters of the country name on the keyboard, and select one country from the list of results. 4. If needed, select a new city/town: a. Tap b.
c. Find the street you need: x The most likely street name is always shown in the input field. To accept it, tap x . If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap the street from the list. 6. 7. ). Select Enter the house number: a. Tap b. Enter the house number on the keyboard. (To enter letters, tap c. Tap to finish entering the address.
Tip! If you know that you will use this destination frequently, before tapping to confirm the destination, put it on the list of your Favourites first: tap then , give a name for the new Favourite, and tap to save the location. The map with the destination returns automatically. Now you can start your journey. 3.1.1.2 Entering the midpoint of a street as the destination You can navigate to the midpoint of a street if the house number is not available: 1. If you are on the Map screen, tap menu. 2.
. The midpoint of the 5. Instead of entering the house number, tap street is selected as the destination. 6. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( location. Tap ) appears at the new to confirm the destination, or tap to select a different destination. 7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated.
c. Find the street you need: x The most likely street name is always shown in the input field. To accept it, tap x . If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap the street from the list. 5. Enter the intersecting street name: 1. 6. ). Select Tap . x If only a few intersecting streets exist, their list appears immediately.
3.1.1.4 Selecting a city/town centre as the destination The city/town centre is not the geometric centre of the settlement but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of the important intersections. to return to the Navigation 1. If you are on the Map screen, tap menu. 2. In the Navigation menu, tap the following buttons: 3. If necessary, modify the country as described earlier (page 26). 4.
6. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( location. Tap ) appears at the new to confirm the destination, or tap to select a different destination. 7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap to modify route and start your journey. 3.1.1.
d. Find the city/town you need: x The most likely postal code is always shown in the input field. To accept it, tap x . If the desired number does not show up, open the list of results by tapping 5. . Select the postal code from the list. Enter the street name: a. Tap b. Start entering the street name on the keyboard. c. Find the street you need: x . The most likely street name is always shown in the input field. To accept it, tap x .
7. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( location. Tap ) appears at the new to confirm the destination, or tap to select a different destination. 8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap to modify route and start your journey. 3.1.1.
x You can also search in postal codes. As postal codes consist of only a few characters, this is usually faster than entering the name of the city/town. 3.1.2 Selecting the destination from the Places of Interest You can select your destination from the Places of Interest included with your software.
4. (optional) The Places in the list are ordered by the length of the necessary detour (when navigating a route) or by their distance from the current position (when no destination is given). If you need to reorder the list, tap . 5. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen. 6. (optional) Tap to see the details of the selected Place.
3. The preset search categories appear: x : x If an active route exists, petrol stations are searched along the route. x If there is no active route (destination is not selected), they are searched around the current position. x If the current position is not available either (no GPS signal), they are searched around the last known position. x : x If an active route exists, parking lots are searched around the destination of the route.
5. (optional) The Places in the list are ordered by their distance from the current or last known position, from the destination or by the length of the necessary detour. If you . need to reorder the list, tap 6. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen. 7. (optional) Tap to see the details of the selected Place.
x to search for a place within a selected city/town. (The Tap result list will be ordered by the distance from the centre of the selected city/town.) x to search for a place around the destination of the Tap active route. (The result list will be ordered by the distance from the destination.) x to search along the active route, and not around a Tap given point.
8. Sometimes the list of brands in the selected Place subcategory appears. Select one brand or tap to list all Places in the selected subcategory around the selected location or along the route. 9. Finally, the results appear in a list. 10. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 11.
3.1.2.4 Searching for a Place of Interest by name You can search for Places of Interest by their names. You can search around different locations or along your route in the whole Place database or in one Place category or subcategory only. to return to the Navigation 1. If you are on the Map screen, tap menu. 2. In the Navigation menu, tap the following buttons: 3. Tap 4. Select the area around which the Place should be searched for: , . .
, select the city/town to search in. 5. (optional) If you have selected 6. Select one of the main Place categories (e.g. Accommodation) to search in or tap to search among all Places. 7. Select one of the Place subcategories (e.g. Hotel or Motel) to search in or tap to search in the selected Place category. 8. Tap 9. Using the keyboard, start entering the name of the Place. if you have not done it before.
to open the list of Places with 10. After entering a few letters, tap names containing the entered character sequence. 11. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap . 12. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle.
3.1.2.5 Selecting nearby assistance from 'Where Am I?' You can quickly search for nearby assistance from the 'Where Am I?' screen. 1. On the Map screen, tap 2. Tap 3. Preset search categories appear, all for searching around the current position (or around the last known position if the current position is not available): to open the Quick menu. , and then . x : Car repair and roadside assistance services x : Medical and emergency services x : Police stations x : Petrol stations 4.
6. Browse the list if necessary and tap one of the list items. A full screen map appears with the selected point in the middle. The name and address of the Place is displayed at the top of the screen. 7. to see the details of the selected Place. If there is a telephone (optional) Tap number saved for this Place, you can make a call to that number by tapping the green button at the bottom. Tap 8. If necessary, tap the map somewhere else to modify the destination.
to select the Cursor as the destination. 5. Tap 6. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap to modify route and start your journey. 3.1.4 Selecting the destination from your Favourites You can select a location that you have already saved as a Favourite to be your destination. Adding a location to the list of Favourite destinations is described on page 60. 1.
to confirm the destination, or tap location. Tap to select a different destination. 5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap to modify route and start your journey. 3.1.5 Selecting one of the most likely destinations (Smart History) The destinations that you have set earlier appear in the History list. Two of those recent destinations are shown in the Destination menu for easy access.
5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap to modify route and start your journey. 3.1.6 Selecting a recent destination from the History The destinations that you have set earlier appear in the History. 1. Access the History: x If you are on the Map screen, tap x If you are in the Navigation menu, tap and then tap . and then tap . 2. The list of recent destinations appears.
5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap to modify route and start your journey. 3.1.7 Entering the coordinate of the destination You can also select a destination by entering its coordinate. Do as follows: 1. If you are on the Map screen, tap menu. 2. In the Navigation menu, tap 3. Open the 4.
7. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( location. Tap ) appears at the new to confirm the destination, or tap to select a different destination. 8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap parameters, or tap to modify route and start your journey. 3.1.
7. When the new destination is selected, the list returns. 8. To add more destinations, tap where you want to insert the new route point in the list, and repeat the above procedure. 3.2 Viewing the entire route on the map It is easy to get a map overview of the active route. Do as follows: 1. If you are on the Map screen, tap menu. 2. In the Navigation menu, tap 3. Tap . The active route is displayed in its full length on the map together with additional information and controls.
3.3 Checking route parameters and accessing route related functions You can check different parameters of the route recommended by the software. 1. If you are on the Map screen, tap menu. 2. In the Navigation menu, tap 3. The following pieces of information are displayed: 4. to return to the Navigation . x The name and/or address of the destination. x Warning icons (if any). They provide extra information about your route (e.g. unpaved roads or toll roads to be taken).
3.4 Modifying the route When navigation is already started, there are several ways to modify the active route. The following sections show some of those options. 3.4.
3. . If you are starting a new route, If you already have a route, tap tap . 4. The first line is the start of the route, normally the current GPS position. Tap confirm your action at the warning message. 5. The Destination menu appears and you can select the start point of the route the same way you select a destination. 6. When the new start point is set, tap 7. The map returns with a transparent Vehimarker (showing that there is no GPS reception).
8. . To return to normal navigation, tap 3.4.3 Editing the list of destinations (Edit Route) You can edit the route by modifying the list of destinations. You can add or remove destinations, modify the start position or reorder the list. 1. If you are on the Map screen, tap menu. 2. In the Navigation menu, tap 3. Tap 4. You have the following options: to return to the Navigation . . x Tap to add a new destination. x Tap to delete a destination.
3.4.5 Cancelling the active route To cancel the navigated route, do one of the following: x If you are on the Map screen, tap with waypoints, you need to tap x and then tap . (If you have a route until all waypoints are deleted.) In the Navigation menu, tap and then tap The active route is deleted with all its waypoints. .. 3.4.
and scroll down for 5. Or if you cannot find a good alternative, tap routes with different routing methods. 6. Select one of the route alternatives and tap to return to the previous screen. The software recalculates the route. The orange line now shows the new recommended route. 3.4.7 Checking route alternatives for an existing route To recalculate the active route with a different route planning method, you can modify the Route settings (page 75).
6. Or if you cannot find a good alternative, tap routes with different routing methods. 7. Select one of the route alternatives then tap and hold for a few seconds to return to the Map screen. The software recalculates the route. The orange line now shows the new recommended route. and scroll down for 3.4.8 Changing the vehicle used in route planning To recalculate the active route for a different vehicle, do as follows. These changes can also be made in Settings (page 75). 1.
3.4.9 Changing the road types used in route planning To recalculate the active route with different road type preferences, do as follows. These changes can also be made in Settings (page 75). and then tap . 1. On the Map screen, tap 2. Tap any of the listed road types to modify the route. If needed, scroll the list for all road types. You have the following options (their order depends on the selected vehicle type): 3.
3.5 Saving a location as a Favourite destination You can add any location to Favourites, the list of frequently used destinations. Planning a route to one of the Favourite destinations is described on page 46. 1. Select a destination as described before. It can be an address, a Place, any location on the map, a previously used destination from History, a coordinate or a location where a photo was taken. 2. When the full screen map appears with the selected location in the middle, tap . 3. Tap 4.
x and then tap If you are in the Navigation menu, tap . 2. The list of Favourite destinations is displayed. 3. Tap the Favourite that you want to edit. If necessary, browse down to see more of the list or tap destination. and enter a few letters from the name of the Favourite 4. A full screen map appears with the selected point in the middle. 5. Tap 6. Tap any of the data fields and modify its content. 7.
5. Tap to save the location as a new alert point. 3.7 Editing an alert point You can edit a previously saved or uploaded alert point (for example a speed camera or a railway crossing). 1. Browse the map and select the alert point to edit. The red circle appears around the alert point. 2. Tap 3. Scroll down the list and tap 4. On the newly opened screen, modify the type of the alert point, the direction from which you expect the alert, or (if applicable) the speed limit for this alert point. 5.
3.8 Watching the simulation of the route You can run a simulated navigation that demonstrates the active route. Do as follows: to return to the Navigation 1. If you are on the Map screen, tap menu. 2. In the Navigation menu, tap 3. Tap 4. Scroll down the list and tap . The simulation starts from the starting point of the route, and using a realistic speed, it leads you through the whole recommended route. 1.
x x 2. Tap : Jump to the previous route event (manoeuvre). : Tap to increase the speed of the simulation to 4, 8 or 16 times faster. Now tap again to return to the normal speed. to stop the simulation.
4 Reference Guide On the following pages you will find the description of the different concepts and menu screens of the software. 4.1 Concepts 4.1.1 Smart Zoom Smart Zoom provides much more than just a usual automatic zoom feature: x While following a route: when approaching a turn, it will zoom in and raise the view angle to let you easily recognise your manoeuvre at the next junction.
CO2 emission calculations are estimations only. They cannot take elevations, curves and traffic conditions into account. x x : Results in a route with fewer turns and no difficult manoeuvres. With this option, you can make your software to take, for example, the motorway instead of a series of smaller roads or streets. Vehicle types: x : x Manoeuvre restrictions and directional constraints are taken into account when planning a route. x Roads are used only if access for cars is allowed.
4.1.4 Green routing Route calculation is not only about finding the quickest or shortest route. For some of the vehicle types, you can also check the fuel consumption and CO2 emission when planning a route, and you can create cost effective routes with less effect on the environment. In Settings, select to enter the necessary parameters of your vehicle and the average fuel price.
x Audio warning: beeps or the spoken type of the alert can be played while you are approaching one of these points, or extra alert sounds if you exceed the given speed limit while approaching. x Visual warning: the type of the alert point, its distance and the related speed limit appear on the Map screen while you are approaching one of these cameras. The distance from the camera is also displayed. For some of the alert points, the enforced or expected speed limit is available.
The software is connected to the GPS receiver, but the signal is too weak and the receiver cannot determine the GPS position. GPS navigation is not possible. Only a few satellites are received. Position information is available, but elevation (altitude) cannot be calculated. GPS navigation is possible, but the position error may be significant. Altitude information is available, the position is a 3D position. GPS navigation is possible. 4.1.
to open the Traffic Summary screen: Tap to open the list of traffic events: Tap Now tap any of the list items to see its details, and to display the affected road segment in its full length on the map: Note! If there are traffic events on the recommended route that the application has not bypassed, the icon will open the list of significant traffic events to let you quickly check them. 4.2 'More' menu The 'More' menu provides you with various options and additional applications.
Button Description You can configure the program settings, and modify the behaviour of the software. Fine-tune route planning options, change the look of the Map screen, turn on or off warnings, or restart the Configuration wizard, etc. See the next chapter for details. Select a country from the list and see useful driving information about the selected country.
4.3 Settings menu You can configure the program settings, and modify the behaviour of the software. Tap the following buttons: , , The Settings menu has several options. Tap . or scroll with your finger to see the full list. Button Description Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. The content of the Quick menu (page 20) is fully customisable.
Trip logs and track logs contain useful information about your trips. Trip logs can be saved manually when you reach your destination or you can turn on the automatic saving here. The application collects usage information and GPS logs that may be used for improving the application and the quality and coverage of maps. Here you can enable or disable collecting these logs. Modify the basic software parameters set during the initial setup process. For details, see page 7.
Maps may contain driver alert information. Tap this button to turn on or off these warnings and to set the distance from the hazard to receive the warning at. These can be set individually for the different warning types. The application can warn you when you approach road safety cameras like speed cameras or dangerous areas like school zones or railroad crossings. Tap this button and set the different alert types individually.
Button Description Use this switch to enable or disable the TMC receiver that can receive real-time traffic information. The rest of the buttons below are all related to the TMC function and are available only if the receiver is enabled. ZE-NC620DMH will automatically search for available TMC stations and tune in to receive them. If you would like to determine which station to use, turn off automatic tuning and use the left and right arrows on the Traffic Summary screen for manual tuning.
screen, and the part of the route not matching your preference will be displayed in a different colour on the map. In the list of road types you can see in how many segments and what total length of the road type is used in the current route. Button Description You might need to avoid motorways when you are driving a slow car or you are towing another vehicle. Charge roads are pay roads where you can purchase a pass or vignette to use the road for a longer period of time.
Route Planning Method types: Button Description Gives a quick route if you can travel at or near the speed limit on all roads. Usually the best selection for fast and normal cars. Gives a short route to minimise the distance to travel. It can be practical for slow vehicles. Searching for a short route regardless of the speed, this route type is rarely practical for normal vehicles. Gives a quick but fuel efficient route based on the fuel consumption data given in Green Routing settings (page 77).
If the selected routing method is not Green, you can have the best green alternative on screen when selecting the route. 4.3.6 Map settings You can fine-tune the appearance of the Map screen. Adjust the map view to your needs, choose suitable colour themes from the list for both daytime and night use, change the blue arrow to a 3D car model, show or hide 3D buildings, turn track logging on or off, and manage you Place visibility sets (which Places to show on the map).
Select which Places to show on the map while navigating. Too many Places make the map crowded so it is a good idea too keep as few of them on the map as possible. For this, you have the possibility to save different Place visibility sets. You have the following possibilities: x Tap the checkbox to show or hide the Place category. x Tap the name of the Place category to open the list of its subcategories. x Tap to save the current Place visibility set or to load a previously saved one.
4.3.8 Display settings Display related settings include menu animations, separate skins for daytime and night use and the brightness of the display. When animation is turned on, buttons on menus and keyboard screens appear in an animated way. Screen transitions are also animated. Select the style and colours of the application used in daytime mode. Select the style and colours of the application used in night mode. Adjust the display backlight. 4.3.
4.3.11 Log collection settings If you accept this when first using the application, it collects usage information and GPS logs that may be used for improving the application and the quality and coverage of maps. The data is processed anonymously; no one will be able to track any personal information. Here you can enable or disable collecting these logs. Anonymous statistical information on using the navigation software is collected for later development purposes.
5 Glossary 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
North-up map orientation In North-up mode the map is rotated so its top always faces North. This is the orientation for example in Find on Map. See also: Track-up map orientation. Road Safety Camera Special alert points for speed, red light or bus lane cameras. Different data sources are available. You can configure the software to warn you when you approach one of these cameras. Detecting the location of Road Safety Cameras is prohibited in certain countries.
6 End User Licence Agreement 1 The contracting parties 1.1 This Agreement has been entered into by and between NNG Kft. (registered seat: 23 Bérc utca, H-1016 Budapest, Hungary) as Licensor (hereinafter: Licensor) and You as the User (hereinafter: User; the User and the Licensor jointly referred to as: Parties) in subject of the use of the software product specified in this Agreement. 2 Conclusion of the Agreement 2.
to utilise the Database, to offer it for utilisation and to transfer it for utilisation as set forth in this Agreement. 5.4 Pursuant to this Agreement, all rights vested in the Software Product shall remain in the ownership of the Licensor, except for those to which the User is entitled under law or by virtue of this Agreement. 6 Rights of the User 6.
incompatibility of the Software Product with any other system, device or product (e.g. software or hardware). 8.5 The Licensor also draws the attention of the User to the fact that, when using the Software Product in any form of vehicle, observing the traffic regulations and rules (e.g.
identifier of the device running the Software Product and not associated in any way with any personal information of the User or with the User itself. 10.2 The collected data may be uploaded to Licensor’s database and used exclusively for the purpose of enhancing and improving the features and services of the Software Product and the Databases. Uploading is executed through Licensor’s special software or by the User navigation device, and the upload may be enabled or disabled by User.
7 Copyright note The product and the information contained herein are subject to change without prior notification. This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of ZENEC. © 2010 - ZENEC Data Source © 2006 Tele Atlas N.V.
ZENEC by ACR AG · Bohrturmweg 1 · Bad Zurzach · Switzerland www.zenec.com Rev.
