MODELN0: NO: MODEL ZE-DVBT1 0 1 CH DVB-T TUNER CAR SPECIFIC NAVICEIVER FOR VW CARS INSTRUCTION MANUAL
ABOUT THIS INSTRUCTION MANUAL The instruction manual contains important information and warnings about the operation of the ZE-NC2010. Please add this instruction manual to the log book of your vehicle to have access to it any time. NOTE: ■ Text passages with this symbol indicate particular information, which are very important for correct operation. CONTENTS SAFETY INSTRUCTIONS....................................................................................................41 FRONT PANEL BUTTONS.
ENGLISH SAFETY INSTRUCTIONS 1. This unit is designed to be used in a vehicle with a 12V battery and negative ground. 2. Do not operate the unit in any other way than described in this manual. Failure to follow the instructions within this manual will invalidate your warranty. 3. Do not disassemble or alter the unit in any way, because it can cause a defect and your warranty claim will be rejected. Do not attempt to repair or to service the unit yourself, but contact an authorized ZENEC dealer instead. 4.
FRONT PANEL BUTTONS MAIN UNIT bq bs br bs bt 1 7 2 8 3 9 4 bl 5 bm bn 6 bo bp 42
ENGLISH 1. POWER/MUTE ■ Press the POWER/MUTE-button to turn on the unit. ■ Press and hold the POWER/MUTEbutton to turn off the unit. ■ Press the POWER/MUTE-button to mute the audio output and press the button again, to go back to the last volume level. 2. FM/AM ■ Press the FM/AM-button to enter the radio mode. ■ Change in radio mode between the following radio bands: FM-1, FM-2, FM3, AM-1, AM-2 3. DVD ■ Press the DVD-button to enter the DVD/ CD mode. 4.
REMOTE CONTROL BUTTONS FRONT REMOTE CONTROL 2 1 3 4 6 7 8 bl bm bo bp bq bu cl co cp cs ct 5 9 bn br bs bt cm cn cq cr 44
ENGLISH 1. POWER ■ Press the POWER/MUTE-button to turn on the unit. 2. EJECT ■ Press the EJECT-button to insert or eject a disc. 3. MUTE ■ Press the MUTE-button to mute the audio output. 4. SRC ■ Press the SRC-button to change between the following playing modes: RADIO ➞ Disc ➞ NAVI ➞ AV IN ➞ DVBT ➞ SD CARD ➞ iPod ➞ USB ➞ CAMERA The selected playing mode will be displayed on the screen. 5. Numeric keypad ■ Directly access to track/chapter or preset station. 6. VOL up ■ Increase the volume. 7.
REAR REMOTE CONTROL (M-ZONE) 1 3 4 2 DTV U MEN ROO T 5 7 9 bn bm bq bp bt bu 6 8 bl EPG TV/RADIO bo br bs cm cl P P 46
ENGLISH 1. R-SRC ■ After you have activated M-Zone in the main menu, press the R-SRC-button to choose the playing mode for the rear zone. 2. Numeric keypad ■ No function. 3. MUTE ■ Press the MUTE-button to mute the audio output. 4. GOTO Search ■ No function. 5. TITLE ■ Enter the title menu of the DVD. ■ Scan function for CD mode. Each track will be played back for 10 seconds. 6. ROOT ■ Enter the main menu of the DVD. ■ Turn on PBC while playing VCD. 7. OK ■ Start or pause the playback.
BASIC OPERATION POWER ON/OFF ■ Press the POWER/MUTE-button on the front panel to turn on the unit. Press and hold the button for 2 seconds to turn off the unit. ■ It's also possible to turn on and off the unit with the ignition, but this depends on the last state, before the unit was turned off. Current playing mode SELECT A PLAYING SOURCE ■ After you have turned on the unit, touch the icon with the current playing mode in the upper left corner of the screen to go back to the main menu.
ENGLISH MUTE FUNCTION ■ Manually: Press the Mute/Power-button on the front panel to mute the audio output. Press the button again to deactivate the mute function. ■ Automatically: The audio output will be muted, if you make a phone call. AUDIO CONTROL MENU ■ The audio control menu allows you to adjust your audio system to meet your requirements and the acoustical characteristics of the vehicle.
SETUP SETUP MENU ■ Touch the [ ]-Icon in the main menu to enter the setup menu. ■ Touch the desired menu item directly on the display to open the submenu and to change the selected adjustment. ] and [ ■ The icons [ of the setup menu. ] indicate that there are more options available on the next page ■ Touch the "SETUP" icon in the right upper corner to exit the setup menu. ■ After 15 seconds without any operation, the audio menu exits back to the current audio source automatically.
ENGLISH GENERAL Settings Options Function Clock (HH:MM) Adjusts the clock appearing in the top right corner of the TFT screen. AM/PM AM PM Choose AM or PM mode (only for 12 Hr mode). 12Hr Clock displays 12 hour time using AM and PM. 24Hr Clock displays 24 hour time up to 23:59. Clock Mode RDS CT Beep Camera Image Bluetooth On Off On Off When ”CT” is activated, the unit adjusts the clock/ time itself via RDS. Select to activate/deactivate the beeper function.
VIDEO Settings TV Shape Aux IN Options Function cinema Widescreen picture scaling. normal Normal picture scaling. Auto The video output is switched automatically based on the current disc. PAL The video output is in the standard PAL format. NTSC Brightness -10 to +10 Monitor Off The video output is in the standard NTSC format. Adjusts the brightness of the screen. Turns the monitor off.
ENGLISH Settings Options Function Down Mix 2-channel stereo mode. Full 6 CH 6-channel mode. Down Mix Front Speakers Center Speakers Sur Speakers Sub Woofer Large Recommended for speakers > 5.25". Small Recommended for speakers < 5.25". Large Recommended for speakers > 5.25". Small Recommended for speakers < 5.25". None No speaker present. Large Recommended for speakers > 5.25". Small Recommended for speakers < 5.25". None No speaker present. None No speaker present.
LANGUAGES Settings DVD Menu Subtitle Function Select the language for the DVD menu. Select the language for the subtitle. Audio Select the language for the soundtrack. OSD Select the language for the OSD menu. VOLUME Settings Options Function Adjusts The unit starts with the volume, which was adjusted with the menu item"start vol adjust". Start Volume Last The unit starts with the volume, which was adjusted before it was turned off.
ENGLISH MISC SETUP MENU Settings TS Calibrate Set Password Options No Yes Locked 1. Kid Safe 2. G 3. PG Parental control 4. PG-13 5. PG-R 6. R Anti CODE Anti Theft SW Load Factory Software Update Navi Update Function Touch "Yes" to enter the touch screen calibrate mode.Then follow instructions on the screen. Enter your password to unlock the parental lock. Kid safe: A movie rating that is appropriate for children. G: A movie rating that allows admission to persons of all ages.
ANTI-THEFT CODE ■ To secure the unit from a theft and later use, it’s possible to enter a four-digit anti-theft code. If the anti-theft code is activated and the unit will be disconnected from the power supply and reconnected again, it’s necessary to enter the anti-theft code to start up the unit. Otherwise it’s not possible to restart the unit.
ENGLISH INSTALLATION OF SOFTWARE UPDATES NOTE: ■ There will be new software updates appearing for download at irregular intervals on www. zenec.com. Please follow the instruction notes of the software update, to install the update properly.
RADIO MODE 1 2 3 4 5 6 cm bu cl 7 8 9 bl bm bn bo cn bp bq br co cu cp cq cr cs 58 ct bs bt
ENGLISH 1. Current mode of unit. Touch to open the main menu. 2. Displays the signal strength. 14. Touch to seek forward. 15. Touch to switch between the two submenus. 3. The TP button lights up orange when the radio station provides traffic announcements. 16. Touch to turn to previous page. 4. The TA button lights up orange when a traffic announcement is transmitted. 18. Touch to turn to next page. 17. Touch to mute the volume. 5. Bluetooth indicator. 19.
NOTE: ■ This product features a tuner with RDS function. RDS (Radio Data System) is a system that transmits broadcast station information together with FM programs. RDS service is not available in AM broadcasting. RDS service availability depends on the FM broadcasting provider. ■ To use the RDS features, the AF function needs to be enabled. Please be sure to activate the AF function at the very first time.
ENGLISH DVD MODE 3 4 Area A Area F Area B Area C Area D Area E 1 2 5 6 7 8 9 ■ Touch the lower section of the screen to display these icons. If no operation has been entered for 10 seconds, these icons will be automatically hidden. 1. Touch to repeat from A to B. Select the repeat point A whenever you want to start and the point B whenever you want to end, then, the DVD will be played back from A to B continually. 2. Touch to repeat playback of title/folder/chapter/disc. 3.
CD/MP3/WMA MODE 1 3 br 2 bp bq 5 4 7 6 8 9 bl bs 1. 2. 3. 4. 5. bm bn bo Current mode indicator. Touch to open the main menu. Display of disc folders and titles. Current time indicator. Touch to repeat track/folder/disc. Touch to display the numeric keypad on the screen. Use the numeric keypad to access a track directly. 6. Touch to activate/deactivate the random mode. 7. Touch to play previous track. 8. Touch to play/pause. 9. Touch to play next track. 10. Touch to stop disc playback. 11.
ENGLISH SD-CARD MODE ■ Insert the SD or SDHC card (up to 8 GB) into the SC-card slot and enter the SD card mode. NOTE: ■ The interface and the operation of the SD card mode is similar to the CD/MP3/WMA mode. ■ Depending on the folder structure and the content, the number of the available folders is limited. ■ Please pay attention that the operation is depending on the memory of the SD or SDHC card and stored data volume. USB MODE ■ Insert the USB stick into the USB slot and enter the USB mode.
iPod MODE 1 3 bt bq 2 br 5 4 bs 6 8 bu bn bo bp 7 9 bl bm ■ Connect the iPod with the optional iPod cable ZE-NC-IPS to the USB port and choose the iPod playback mode. 1. 2. 3. 4. 5. Current mode indicator. Touch to open the main menu. Display of iPod folders and title. Current time indicator. Touch to repeat track/folder. Touch to display the numeric keypad on the screen. Use the numeric keypad to access a track directly. 6. Touch to scan each file in the current folder for 10 seconds. 7.
ENGLISH BLUETOOTH MODE BLUETOOTH OPERATION 1 9 bm bo 2 3 4 5 6 7 bl bn 8 1. Current playing source: Bluetooth. Touch to go back to the main menu. 2. Bluetooth icon. 3. Open the dialling function. 4. Open the phone book. 5. Open the call log. 6. Open the A2DP mode. 7. Open the pairing function. 8. Voice transfer back from the unit to the mobile phone. 9. Display the signal strengh of the paired mobile phone. 10. Open the Bluetooth setup. 11. Accept resp. start a phone call. 12. Dismiss resp.
PHONE BOOK ■ After the mobile phone is paired with the unit, the synchronisation of the phone book will start automatically. All entries get transferred from the mobile phone to the unit. Set ”Auto Connect” at the unit and your mobile phone to ”On”. SEARCH FUNCTION FOR PHONE BOOK ENTRIES ]-icon to open the keypad. Enter a letter to search for the initial letter of the ■ Touch the [ family name. The entries with the respective initial letter get displayed directly.
ENGLISH CALL LOG ■ Display the dialled, received and missed calls. A2DP FUNCTION ■ Start the playback on the unit. The music player of the mobile phone will be activated automatically and it's possible to operate and control the music player of your mobile phone with the unit. PAIRING ■ You have two possibilities to pair a mobile phone with the unit. Please pay attention that the Bluetooth mode of the unit must be activated in the setup menu. 1. Searching for nearby phones. 2.
1. Searching for nearby phones. 1. Activate the Bluetooth mode on the mobile phone und check, if it allows to detect it from other devices resp. if the function to search for Bluetooth devices is activated. 2. Touch the Add icon to open the search menu and to start the search run. 3. After the mobile phone was found from the unit and a Bluetooth connection was established, the name of the mobile phone will appear on the screen of the unit. 4.
ENGLISH SETUP AUTO CONNECT ■ Automatically connect to a paired mobile phone. PIN CODE ■ Change the pairing code (default setting is 1234). UPDATE ■ Update the Bluetooth software. MICROPHONE ■ Choose between using the internal or external microphone. VERSION ■ Display the current Bluetooth software version of the unit. NOTE: ■ There will be new Bluetooth software updates at regular intervals available on www.zenec.com. Please follow the instruction manual of the software update to install it.
ENTER A VOICE TAG ■ The user can record a voice tag for 200 phone numbers, i.e. it's possible to start a phone call with a pre-recorded voice tag. 1. Choose one entry form the phone book. 2. Start to record a voice tag and follow the instructions to finish the procedure. Entries with a voice tag are indicated with a [voice tag]-icon. After a voice tag was recorded, it's also possible to delete this voice tag. Choose the entry and delete the voice tag. 3.
ENGLISH NOTES: ■ The line-of-sight distance between the unit and the mobile phone must be 8 metres or less, otherwise a flawless function can't be guaranteed. The transmission distance may become shorter than the estimated distance, depending on the environment during use. ■ It cannot be guaranteed, that all mobile phones can be paired and all that functions will work with the unit. ■ The operation of the mobile phone is different according to the model and brand.
NAVIGATION MODE ■ Please read the separate navigation software manual to learn more about the operation of the navigation system. ■ In navigation mode, it's possible to play back an audio source. In this case, the audio output of the current playing mode will be lowered during a voice response. ■ It's possible to adjust the volume of the navigation voice with the PUSH/VOL rotary knob during a voice response. The adjusted volume will be saved.
ENGLISH CAN BUS ■ CAN is the abbreviation for controller area network. It’s a international standard Bus protocol of the automotive industry. Because of this protocol, it's possible to use the steering wheel buttons and other functions of the vehicle in which the ZE-NC2010 is mounted to. Connect the CAN Bus interface with the ZE-NC2010 and pay attention to the connection diagram first.
GENEREL INFORMATION ABOUT DIVX ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.
ENGLISH TROUBLESHOOTING Problem GENEREL Unit will not power on. Cause Solution Radio fuse blown. Install new fuse with correct rating. Car battery fuse blown. Install new fuse with correct rating. Illegal operation. Press the RESET button. Improper audio output connection. Check wiring and correct. Volume set too low. Increase volume level. Speakers damaged. Replace speakers. Only one channel is playing. Check the balance and fader adjustments.
TUNER Auto antenna not properly connected. Connect the auto antenna cable properly. REG function is activated. Turn REG function off. The antenna power cable is not connected. Connect the antenna power cable properly. The AF function is not activated. Activate the AF function. Disc already inside unit. Eject current disc and insert new one. Disc is warped or scratched. Use disc in good condition. Disc is dirty or wet. Clean disc with soft cloth. Incompatible disc is used. Use compatible disc.
ENGLISH SPECIFICATIONS Main Amplifier Power Output: 20 watts X 4 channels into 4-ohms @ < 10% THD+N Signal to Noise Ratio: 70dBA below reference. (Reference: 1 watt, 4-ohms) MAX Power: 50 X 4 watts into 4-ohms, all channels driven Frequency Response: 20Hz to 20 kHz, -3dB. Aux input used as source reference Reference Supply Voltage: 14.
Warranty 2 Years Dear customer Thank you for purchasing this ZENEC product. It is advisable to keep the original packing material for any future transporting of the product. Should your ZENEC product require warranty service, please return it to the retailer from whom it was purchased or the distributor in your country. This ZENEC product is warranted against defective materials or workmanship for a period of TWO years from date of purchase at retail.
WARRANTY ZENEC Model: ZE-NC2010 Serial number:............................................................................................................................... Date of purchase:........................................................................................................................... Your name:..................................................................................................................................... Your address:......................................
MODEL NO: ZE-DVBT1 0 1 CH DVB-T TUNER ZENEC · By ACR AG · Bohrturmweg 1 · Bad Zurzach · Switzerland