Instruction manual

ENGLISH
73
CAN bUS
■ CAN is the abbreviation for controller area network. It’s a international standard Bus
protocol of the automotive industry. Because of this protocol, it's possible to use the
steering wheel buttons and other functions of the vehicle in which the ZE-NC2010 is
mounted to. Connect the CAN Bus interface with the ZE-NC2010 and pay attention to the
connection diagram rst.
Because of the different functions of the steering wheel buttons in the different vehicles,
the ZE-NC2010 doesn't support all functions. You will nd a list of the supported functions
on www.zenec.com.