Specifications

9
Figure 2
Figure 4Figure 3
Figure 6Figure 5
BPB Series
Assembly
(continued)
22) Place Outer Drive Shaft (11) into Hub
(12) (when applicable), and rotate
until Drive Shaft (4) and Outer Drive
Shaft (11) mate.
23) Place Outer Drive Gear (18) over
Hub (12), insert Yoke Retainers (19)
into appropriate grooves followed by
Drive Strap (20) and tighten down
with Drive Strap Screws (28).
24) Pour oil into inlet port to lubricate
internal components, then rotate
pump to check for free rotation.
25) Apply standard gun grease to
Grease Fitting (26). Conoco Super
Lube M EP Grease or equivalent is
recommended.