Manual

Control the volume on your home audio system without changing modes

Find the code that operates your amplifier. Test it to

make sure it's the correct one by following the procedure

in "Programming Your Remote" on the previous page.

Programyour audio system into one of the available AUX

modes: Aux, Aux+l, Aux+2, or Aux+3,

Press and hold PRGon your remote until the indicator

light stays lit, then release.

Press 4-9-9; then ENTERon the remote. The indicator

light will flash three times the code was accepted.

Audio system volume/mute now appears in all modes.

Note: You can also program Cable Box Volume and Mute

control (if available) into your cable box mode (CABLE or

AUX mode) by repeating the steps for programming on

the previous page but entering 3-9-9, instead of a brand

code, then pressing ENTER.

To put eve(ything back to normal, mprogram the mode from Step

3 with the original brand code.

If you can't find the code for your amplifier, use the Auto Find

feature on page 41.

AMPLIFIER Audio device which sends sound to speakers, like an Audio Tuner, Receiver, or Amplifier.

See Audio Tuners/Amp list on page 43.

CABLE BOX VOLUME/MUTE Some cable boxes have volume controls,

2o6-3803 P A G E 3 9